Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £110.00 through £143.40 ex VAT (£132.00 – £172.08 inc VAT)
Socketless cast iron soil, waste and rainwater system made to BS EN 877. Stack Support Console, available in 70mm, 100mm, 150mm, 200mm. Cast iron, supplied factory coated.
Product codes: HS3070 (70mm), HS4070 (100mm), HS6070 (150mm), HS8070 (200mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Soil is a socketless cast iron soil, waste and rainwater system made to BS EN 877. Plain-ended pipes and fittings are joined with stainless steel or ductile iron couplings, giving a slim, continuous line on a façade or in a service riser. Cast iron is non-combustible, quiet in use and very long-lived. That is why it remains the specification of choice for heritage buildings, tall stacks, and anywhere acoustic performance or fire safety matters.
A stack support console with a guidance clamp, rated to a maximum load of 3000N.
Available in 4 sizes, from 70mm to 200mm.
Typical use: Carrying and guiding tall stacks from a wall or strut.
| Size | Product code |
|---|---|
| 70mm | HS3070 |
| 100mm | HS4070 |
| 150mm | HS6070 |
| 200mm | HS8070 |
Often used with: Stack Support Pipe, Stack Support Bracket, Cantilever Bracket.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 70mm (HS3070), 100mm (HS4070), 150mm (HS6070), 200mm (HS8070).
Up to 3000N in each size. Check the stack weight between supports against this figure.
| Size | 70mm, 100mm, 150mm, 200mm |
|---|
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
The handle is compatible with Lumen Rooflights and most pole-operated rooflight and skylight systems. If you are unsure whether it suits your specific rooflight, call us on 0333 987 4452 and we can advise.
LCC soil pipe and fittings are available in 50mm, 65mm, 75mm, 90mm, 100mm and 150mm. Traditional Express is available in 50mm and 100mm. LCC pipe comes in 1829mm, 1219mm, 914mm and 610mm lengths, with eared and plain double socket lengths for cutting on site.
The Brass Rooflight Pole Winder Opener 300mm is a screw-jack operated rooflight opener designed for manual control of timber-framed skylights and Lumen Rooflights. The 300mm fixed arm is suited to standard rooflight positions and is finished in polished brass.
The Polished Lacquered finish suits buildings where period ironwork was finished bright rather than painted — formal entrance elevations, listed properties, and settings where the grille contributes to the decorative programme of the facade. It is appropriate for conservation specifications and high-specification heritage new build.
Available in two sizes: 225mm x 82mm (single airbrick course height) and 225mm x 150mm (double course height). Both sizes fit standard brick coursing positions and install flush into the wall face.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
The satin chrome telescopic rooflight hand winder opener is available in multiple sizes. The telescopic mechanism adjusts to accommodate varying rooflight positions and throw requirements. For a full list of available sizes, visit tuscanfoundry.com or call 0333 987 4452.
Yes. All our mild steel brackets are supplied in either silver or black zinc plate. This coating protects the metal however, both will need painting prior to installation.
We have chosen to use zinc plating for two reasons; firstly that it is a more environmentally friendly than galvanising and secondly that it does not block up the threaded part of the rise and fall cups in the way that galvanising does.
