Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £110.40 through £277.90 ex VAT (£132.48 – £333.48 inc VAT)
Socketless cast iron soil, waste and rainwater system made to BS EN 877. 88° Long Radius Bend with Door, available in 100mm, 150mm. Cast iron, supplied factory coated.
Product codes: HS4011 (100mm), HS6011 (150mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Soil is a socketless cast iron soil, waste and rainwater system made to BS EN 877. Plain-ended pipes and fittings are joined with stainless steel or ductile iron couplings, giving a slim, continuous line on a façade or in a service riser. Cast iron is non-combustible, quiet in use and very long-lived. That is why it remains the specification of choice for heritage buildings, tall stacks, and anywhere acoustic performance or fire safety matters.
An 88° long radius bend with a bolted access door. The large radius keeps flow smooth and the door gives rodding access at the bend.
Available in 2 sizes, from 100mm to 150mm. Nominal weights run from 7.3 kg (100mm) to 12.7 kg (150mm).
Typical use: The foot of soil stacks and other changes of direction that need both a sweeping bend and access.
| Size | Product code | Nominal weight |
|---|---|---|
| 100mm | HS4011 | 7.3 kg |
| 150mm | HS6011 | 12.7 kg |
Often used with: Double Spigot Pipe 3m, High Pressure Stainless Steel Coupling, Ratchet Spanner.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 100mm (HS4011), 150mm (HS6011).
A large radius reduces back pressure and the risk of blockage where the stack turns into the drain. A door at the same point gives access for clearing.
| Size | 100mm, 150mm |
|---|
For rooflights directly above a worktop or sink, a telescopic screw-jack hand winder is the most practical choice. Available in polished brass, satin chrome, and polished chrome, these openers allow controlled ventilation from a fixed handle position without requiring a pole. The 150mm or 250mm size is typically appropriate for standard-height kitchen rooflights.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
The H534 measures 430mm wide x 240mm deep x 366mm high, making it well suited to Victorian villas and townhouses.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
In most cases, replacing like-for-like cast iron guttering on a listed building does not require Listed Building Consent (LBC), provided the replacement matches the existing profile, material, and finish exactly. However, any change of material away from cast iron will almost always require consent. We recommend consulting your local conservation officer before proceeding, and we can provide specification documentation to support your application if required.
Where a standard profile can't match an existing design, we offer a bespoke casting service in association with our pattern makers, typically with a 12–14 week lead time. Please call 0333 987 4452 or use the contact form to discuss your project.
Yes — we strongly recommend painting all products before installation to ensure full coverage on every surface, which reduces long-term maintenance. Standard Premier Rainwater products are supplied in a grey metal primer with rust inhibitors and need two undercoats and one top coat (or one undercoat and two top coats) of a good quality exterior paint.
The H1 is available to accept round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. The 65mm and 75mm variants measure 305mm wide by 197mm deep and 210mm high. The 100mm variant measures 355mm wide by 230mm deep and 240mm high. A 150mm connection option is also available — please contact the team for dimensions.
The in-house Premier Extra coating is formulated for a life expectancy of around 10 years under normal weather conditions, provided any impact damage or surface scuffing is made good promptly. Coastal locations or higher pollution levels can shorten this, so it's worth asking your local stockist or paint manufacturer for site-specific advice.
Bespoke and copy cast iron rainwater goods typically have a lead time of 12 to 14 weeks from order confirmation. This covers pattern-making, casting, finishing, and quality inspection. Stock items are typically despatched within 5 to 7 working days, and non-stock standard profiles within 7 to 10 working days. We always recommend confirming lead times at enquiry stage so your project programme is not affected.
