Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £46.10 through £136.70 ex VAT (£55.32 – £164.04 inc VAT)
Socketless cast iron soil, waste and rainwater system made to BS EN 877. 88° Single Unequal Branch, available in 70mm x 50mm, 100mm x 50mm, 100mm x 70mm, 150mm x 100mm. Cast iron, supplied factory coated.
Product codes: HS3020 (70mm × 50mm), HS4020 (100mm × 50mm), HS4021 (100mm × 70mm), HS6020 (150mm × 100mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Soil is a socketless cast iron soil, waste and rainwater system made to BS EN 877. Plain-ended pipes and fittings are joined with stainless steel or ductile iron couplings, giving a slim, continuous line on a façade or in a service riser. Cast iron is non-combustible, quiet in use and very long-lived. That is why it remains the specification of choice for heritage buildings, tall stacks, and anywhere acoustic performance or fire safety matters.
An 88° single branch with a smaller inlet than the main run, for example 100mm × 50mm. It brings a smaller pipe into the stack or drain without a separate taper.
Available in 4 sizes, from 70mm × 50mm to 150mm × 100mm. Nominal weights run from 1.5 kg (70mm × 50mm) to 5.1 kg (150mm × 100mm).
Typical use: Waste and branch connections into a larger stack or drain.
| Size | Product code | Nominal weight |
|---|---|---|
| 70mm × 50mm | HS3020 | 1.5 kg |
| 100mm × 50mm | HS4020 | 2.2 kg |
| 100mm × 70mm | HS4021 | 2.5 kg |
| 150mm × 100mm | HS6020 | 5.1 kg |
Often used with: 88° Single Equal Branch, Double Spigot Pipe 3m, Rapid Connect Coupling, Taper Pipe.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 70mm × 50mm (HS3020), 100mm × 50mm (HS4020), 100mm × 70mm (HS4021), 150mm × 100mm (HS6020).
The first figure is the main run and the second is the branch. A 100mm × 50mm branch fits a 100mm stack and takes a 50mm branch pipe.
The 88° branch is the standard choice for bringing a horizontal branch pipe into a vertical stack. The branch pipe is laid to a slight fall, so the junction sits just short of a right angle.
| Size | 70mm x 50mm, 100mm x 50mm, 100mm x 70mm, 150mm x 100mm |
|---|
Polished chrome has a bright mirror finish, while satin chrome has a brushed, low-sheen appearance. Both are available in the telescopic hand winder range. The finish choice typically depends on the ironmongery specification for the project.
Cast iron hopper heads from Tuscan Foundry are available in Standard Black (a factory-applied primer and topcoat finish) and Heritage Colours. A linseed oil paint finish is also available, providing a vapour-permeable, historically authentic coating that is particularly appropriate for listed buildings and conservation projects. Full finish specifications are available from the team.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Yes. Cast iron ornamental vents in period patterns are frequently specified on listed buildings and conservation area properties as like-for-like replacements for original Victorian ironwork. Conservation officers generally accept cast iron in period patterns without objection. We can supply specifications to support planning and listed building consent applications.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Select your required size and finish options from the product page and add to cart for an instant price. For project quantities, bespoke requirements, or any specification queries, please call 0333 987 4452 or use the contact form at tuscanfoundry.com.
The H1 is available to accept round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. The 65mm and 75mm variants measure 305mm wide by 197mm deep and 210mm high. The 100mm variant measures 355mm wide by 230mm deep and 240mm high. A 150mm connection option is also available — please contact the team for dimensions.
The H542A measures 240mm wide x 240mm deep x 290mm high, making it well suited to a compact square profile suited to smaller Georgian and Victorian properties, extensions and outbuildings.
Prices for standard cast iron hopper heads are shown on the product page. For larger quantities, bespoke sizing, heritage colour finishes, or full rainwater system specifications, please call 0333 987 4452 or use the contact form.
