Cragside is a Victorian country house in Rothbury, Northumberland, designed by architect Norman Shaw and built for industrialist William Armstrong between 1863 and 1895. It was the first house in the world to be lit by hydroelectric power. It is a Grade I listed building and Scheduled Monument, managed by the National Trust and open to visitors.

What architectural style is Cragside?

Cragside is built in the Old English or Arts and Crafts style, with a dramatic multi-gabled silhouette set into a rocky hillside in Northumberland. The design by Norman Shaw features extensive timber framing, ornate brickwork, and complex rooflines requiring a substantial cast iron rainwater system.

What rainwater systems are appropriate for Victorian country houses like Cragside?

Victorian country houses typically feature cast iron gutters, downpipes, and ornamental hopper heads integral to the architectural character of the building. For complex multi-gabled rooflines, large-capacity cast iron profiles and bespoke castings are often required. Tuscan Foundry Products supplies heritage cast iron for National Trust and similar projects — call 0333 987 4452.

Does Tuscan Foundry supply cast iron guttering for Northumberland properties?

Yes. Tuscan Foundry Products supplies cast iron rainwater systems for listed and period buildings throughout Northumberland, including Victorian country houses, estate buildings, and ecclesiastical properties. Call 0333 987 4452 or email info@tuscanfoundry.com to discuss your project.

What cast iron guttering is appropriate for a period property in Kent?

Period properties in Kent typically feature Half Round or Ogee cast iron gutters depending on the building's age and style. Georgian and early Victorian properties commonly have Ogee profile; later Victorian and Edwardian properties often feature Half Round. Tuscan Foundry Products can advise on the most appropriate choice for your Kent property — call 0333 987 4452.

Do listed properties in Kent need cast iron guttering?

Listed buildings in Kent are required to maintain the character of the original building. Replacing cast iron guttering with uPVC is likely to require Listed Building Consent and is unlikely to be approved by Kent conservation officers. Like-for-like replacement in cast iron does not normally require consent. Tuscan Foundry Products supplies cast iron guttering for listed properties throughout Kent.

Does Tuscan Foundry deliver cast iron guttering to Kent?

Yes. Tuscan Foundry Products delivers cast iron gutters, downpipes, hoppers, and fittings to locations throughout Kent. We supply architects, conservation contractors, and private clients on listed and period buildings across the county. Call 0333 987 4452 or email info@tuscanfoundry.com to discuss your project.

What is a quinquennial inspection?

A quinquennial inspection is a mandatory five-yearly condition survey of a Church of England church, carried out by an approved architect or chartered building surveyor. It assesses the condition of all elements including the roof, rainwater drainage, walls, windows, and fittings, and produces a prioritised schedule of repairs.

What type of guttering is appropriate for a historic church?

Cast iron gutters and downpipes are the appropriate and most commonly specified rainwater system for historic churches. They match original drainage systems on Victorian, Georgian, and earlier ecclesiastical buildings, comply with BS 460:2002, and are acceptable to Diocesan Advisory Committees and conservation officers. Tuscan Foundry Products supplies cast iron church drainage systems — call 0333 987 4452 for guidance.

Does replacing church guttering require a faculty?

Replacing guttering like-for-like in the same material on a Church of England church typically falls within List A or List B of the Faculty Jurisdiction Rules 2015 and may not require a full faculty. Any change of material is likely to require a faculty. Always check with the Diocesan Advisory Committee before proceeding.

How long do cast iron gutters last on a church?

Cast iron gutters correctly installed, painted, and maintained can last in excess of 100 years on a church building. Regular repainting every 7-10 years and prompt attention to joint failures are the key maintenance tasks. Linseed oil paint is increasingly used on ecclesiastical buildings as a period-appropriate and durable finish.

Can Tuscan Foundry supply large-capacity gutters for churches?

Yes. Tuscan Foundry Products stocks large-capacity cast iron gutter profiles appropriate for the wide roof spans of churches, including Deep Half Round and Large Sand Cast profiles. Bespoke profiles are available where the original section is non-standard. Contact us on 0333 987 4452.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

TX Short Radius Bend 100mm Cast Iron Push-Fit Soil

What rooflights is the telescopic hand winder opener compatible with?

The opener is designed for use with Lumen Rooflights and compatible timber-framed skylights. The telescopic shaft and adjustable mounting bracket allow it to be fitted to a range of rooflight frames. If you have a specific rooflight model, call us on 0333 987 4452 to confirm compatibility.

Can the Iron Works Hit & Miss Vent be used externally?

The Antique Black cast iron version is suitable for external use. The Polished Lacquered version is best suited to interiors or sheltered external locations where the polished finish will be protected from weathering. The Polished Brass version is suited to interior and semi-exposed locations. For external applications on exposed elevations, the Antique Black finish is the recommended specification.

What building types is the Cast Iron Louvre Airbrick suited to?

The Cast Iron Louvre Airbrick suits Victorian, Edwardian, and inter-war residential and commercial properties where the louvre-pattern vent was the standard specification. It is the correct like-for-like replacement on listed buildings and conservation area properties, and suits new heritage-style construction requiring an authentic period ventilation grille.

How long is the drive in spike on your rise and fall gutter bracket?

Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.

We are looking to install a new heating system into a Georgian farmhouse and would like to know whether we would be better installing tubular steel column radiators or traditional cast iron radiators.

We are looking to install a new heating system into a Georgian farmhouse and would like to know whether we would be better installing tubular steel column radiators or traditional cast iron radiators.

Cast iron radiators cost no more to run than modern steel or aluminium radiators. Cast iron is a very efficient material at emitting heat, thus you have items like le creuset cast iron pans. Cast iron holds it’s heat extremly well, which means that the radiators stay warm for longer.

What sizes are available for the School Board Airbrick?

The School Board Airbrick (F020801AFC) is available in three standard sizes: 225mm × 75mm, 225mm × 150mm, and 225mm × 225mm. These correspond to one-, two-, and three-brick-course heights and allow ventilation requirements to be met across a range of subfloor and wall opening sizes.

How do I get a price for a rooflight opener?

Prices for rooflight openers are shown on the product pages at tuscanfoundry.com. For volume orders, project pricing, or compatibility queries, please call 0333 987 4452 or use the contact form on our website.

What building types is the Iron Works Patterned Hit & Miss Vent suited to?

The Iron Works Patterned Hit & Miss Vent suits Victorian and Edwardian buildings where decorative cast iron or brass ventilation grilles were part of the original specification — including terrace houses, civic buildings, churches, entrance halls, and estate properties. It is appropriate on listed buildings and conservation area properties as a like-for-like decorative vent replacement, and on new heritage-quality construction where period detailing is required.

Is a brass rooflight opener handle suitable for a listed building?

Yes. Polished brass ironmongery is historically appropriate for period buildings and is generally acceptable to conservation officers for listed building projects. If you require confirmation for your specific scheme, we are happy to advise — call 0333 987 4452.

What sizes are available for the Cast Iron Louvre Airbrick?

The Cast Iron Louvre Airbrick (F020802AFC) is available in 225mm × 75mm, 225mm × 150mm, and 225mm × 225mm — standard brick course heights. All sizes share a consistent depth for straightforward like-for-like replacement of original cast iron louvre airbricks.

Short Radius Bend 100mm

Additional information

FAQ Categories

What rooflights is the telescopic hand winder opener compatible with?

Can the Iron Works Hit & Miss Vent be used externally?

What building types is the Cast Iron Louvre Airbrick suited to?

How long is the drive in spike on your rise and fall gutter bracket?

We are looking to install a new heating system into a Georgian farmhouse and would like to know whether we would be better installing tubular steel column radiators or traditional cast iron radiators.

What sizes are available for the School Board Airbrick?

How do I get a price for a rooflight opener?

What building types is the Iron Works Patterned Hit & Miss Vent suited to?

Is a brass rooflight opener handle suitable for a listed building?

What sizes are available for the Cast Iron Louvre Airbrick?

Working together to make the world a brighter place

CONTACT US

FOLLOW US

MESSAGE US

ABOUT US

PRODUCTS

SUPPORT

CONTACT

Short Radius Bend 100mm

Additional information

FAQ Categories

What rooflights is the telescopic hand winder opener compatible with?

Can the Iron Works Hit & Miss Vent be used externally?

What building types is the Cast Iron Louvre Airbrick suited to?

How long is the drive in spike on your rise and fall gutter bracket?

We are looking to install a new heating system into a Georgian farmhouse and would like to know whether we would be better installing tubular steel column radiators or traditional cast iron radiators.

What sizes are available for the School Board Airbrick?

How do I get a price for a rooflight opener?

What building types is the Iron Works Patterned Hit & Miss Vent suited to?

Is a brass rooflight opener handle suitable for a listed building?

What sizes are available for the Cast Iron Louvre Airbrick?

Related products

Radius Bend 87.5 with Door

Long Radius Bend 100mm

Blank End Drilled & Tapped 2″ BSPT 100mm