Tuscan Foundry Products Logo Black
Find out more about our products by giving us a call
0333 987 4452
Linkedin Envelope
Tuscan Foundry Products Logo Black

Established 1893   |   BS 460:2002 Certified   |   UK & International Supply   |   Expert Technical Support   |   0333 987 4452

Traditional Express Soil Pipe System Long Radius Bend 100mm
CODE Select an option Category

Long Radius Bend 100mm

£114.40 ex VAT (£137.28 inc VAT)

A long radius cast iron bend for 100mm Traditional Express push-fit soil stacks.

UK delivery from £30. Fittings are despatched boxed. See delivery rates.

The Traditional Express long radius bend turns a 100mm push-fit cast iron soil stack with a sweeping curve, giving smoother flow than a short radius bend. It is socketless and joins with push-fit sockets or couplings.

The 87.5° long radius bend is the usual choice at the foot of a soil stack, where it turns into the drain and the gentler sweep helps keep the stack clear. The 22.5° bend suits small changes of line. Where rodding access is needed, use the radius bend with door.

Size: 100mm (4″) at 22.5° and 87.5°.

Cast iron to BS 416, with rubber joint seals to BS EN 681-1. Supplied in a factory black finish that can be overpainted, including in our linseed oil finish.

Suitable for listed buildings and conservation area work. For specification advice, a full schedule or a quotation, call 0333 987 4452 or use the contact form.

Comparing push-fit and caulked soil pipe? Read our Traditional Express vs LCC guide or the soil pipe FAQs.

Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.

Additional information

FAQ Categories

All FAQ
What is a long radius bend used for?
A long radius bend gives a gentle sweeping direction change in a Traditional Express soil pipe run, commonly used at the base of a stack to ease the transition to a horizontal run and reduce the risk of blockage.
What is the difference between a long and short radius bend?
A long radius bend has a wider sweep than a short radius bend, giving a gentler flow transition. Short radius bends are used where space is limited.
Is the Traditional Express range suitable for listed buildings?
Yes. Traditional Express is a cast iron push-fit soil system made to BS 416, with rubber joint seals to BS EN 681-1, and is appropriate for listed buildings, conservation areas and heritage projects.
What finish does the long radius bend come in?
It is supplied with a pre-painted black gloss finish as standard. Please contact us to discuss alternative finish requirements.
How much does the long radius bend cost?
Prices for each size and option are shown on this page, ex VAT. For a full schedule or a project quotation, please call 0333 987 4452 or use the contact form.

Related products