Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £165.00 through £1,650.00 +VAT
Made from quality cast iron our forged radiator delivers heat through out the house. The cast iron radiator combines classic authentic styling with modern reliability and comfort.
The Victorian 4 Column cast iron radiator at 935mm height (V4-93) is a tall, substantial radiator section suited to rooms with higher ceilings or where a large heat emitter is required. The four-column format replicates the original Victorian and Edwardian cast iron radiator profile — the same pattern installed throughout period houses, public buildings, churches, and institutions from the 1880s through the Edwardian era. At 935mm, this is one of the taller standard heights in the Victorian range.
This variant is supplied in white primer — ready for on-site painting in the owner’s or specifier’s chosen colour. The primer finish gives maximum flexibility for those wishing to match a specific interior colour scheme or apply a heritage finish such as linseed oil paint.
Supply and assembly: Supplied in individual sections. Available pre-assembled up to 20 sections ready for installation. Supplied as a floor-standing version with integrated feet as standard — the wall-mounted only version must be requested at time of order. The radiator is supplied with ½” connections. Valves are not included and must be purchased separately if required.
Feet positions: Up to 20 sections — 2 feet, one at each end. Odd numbers 21–39 sections — 3 feet, one at each end and one centrally. Even numbers 22–40 sections — 4 feet, one at each end and 2 evenly spaced. Wall bracket requirements increase proportionally for larger radiators.
For specification support or a project quotation, call Tuscan Foundry Products on 0333 987 4452.
| Sections | 3 Sections, 4 Sections, 5 Sections, 6 Sections, 7 Sections, 8 Sections, 9 Sections, 10 Sections, 11 Sections, 12 Sections, 13 Sections, 14 Sections, 15 Sections, 16 Sections, 17 Sections, 18 Sections, 19 Sections, 20 Sections, 21 Sections, 22 Sections, 23 Sections, 24 Sections, 25 Sections, 26 Sections, 27 Sections, 28 Sections, 29 Sections, 30 Sections |
|---|
Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.
We manufacture a wide variety of brackets for many different cast iron gutter and pipe profiles. More common types are the rise and fall, top fix and side fix rafter and the holderbat or pipe clip.
We can also offer traditional drive brackets, repair brackets and fascia brackets in both steel and cast iron.
It is always advisable to replace like with like because quite often the brackets form and important part of the buildings architecture. Occasionally buildings have special decorative brackets and our UK manufacturing allows us to produce small quantities of bespoke brackets when required.
Polished chrome has a bright mirror finish, while satin chrome has a brushed, low-sheen appearance. Both are available in the telescopic hand winder range. The finish choice typically depends on the ironmongery specification for the project.
The Brass Rooflight Pole Winder Opener 300mm is a screw-jack operated rooflight opener designed for manual control of timber-framed skylights and Lumen Rooflights. The 300mm fixed arm is suited to standard rooflight positions and is finished in polished brass.
Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for all listed building grades. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.
All of our cast iron radiators are availbale as standard with a 1/2″ BSP (15mm) connection. We are though also able to supply many of our radiators and valves with 3/4″ BSP connections. Due to the size proportions of some radiators and valves 3/4″ connections may be more suitable.
The Antique Black finish suits Victorian, Edwardian, and inter-war buildings where ventilation ironwork was painted rather than polished — estate houses, terrace housing, civic buildings, and rural properties. It is also correct for listed buildings and conservation area properties requiring like-for-like replacement of original ornamental cast iron vents.
Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for all listed building grades. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.
Available in two sizes: 225mm x 82mm (single airbrick course height) and 225mm x 150mm (double course height). Both sizes fit standard brick coursing positions and install flush into the wall face.
Prices are shown on the product page. For project quantities, specification support, or a formal quotation, call 0333 987 4452 or use the contact form.
