Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £210.00 through £2,100.00 ex VAT (£252.00 – £2,520.00 inc VAT)
Made from quality cast iron our forged radiator delivers heat through out the house. The cast iron radiator combines classic authentic styling with modern reliability and comfort.
Palletised UK delivery from £80. Please ensure suitable access and means of unloading on site. See delivery rates.
The Victorian 4 Column cast iron radiator at 935mm height (V4-93) is a tall, substantial radiator section suited to rooms with higher ceilings or where a large heat emitter is required. The four-column format provides the characteristic multi-column profile of original Victorian and Edwardian cast iron radiators — the same pattern used in grand reception rooms, hallways, public buildings, and institutional architecture throughout the 19th and early 20th century. The 935mm height gives this model a commanding presence on the wall.
This variant is supplied painted — pre-finished in a colour coat from our standard range, ready to install without further painting preparation. The painted finish is ideal where installation speed is important or where the site finish cannot accommodate on-site painting.
Supply and assembly: Supplied in individual sections. Available pre-assembled up to 20 sections ready for installation. Supplied as a floor-standing version with integrated feet as standard — the wall-mounted only version must be requested at time of order. The radiator is supplied with ½” connections. Valves are not included and must be purchased separately if required.
Feet positions: Up to 20 sections — 2 feet, one at each end. Odd numbers 21–39 sections — 3 feet, one at each end and one centrally. Even numbers 22–40 sections — 4 feet, one at each end and 2 evenly spaced. Wall bracket requirements increase proportionally for larger radiators.
For specification support or a project quotation, call Tuscan Foundry Products on 0333 987 4452.
| Sections | 3 Sections, 4 Sections, 5 Sections, 6 Sections, 7 Sections, 8 Sections, 9 Sections, 10 Sections, 11 Sections, 12 Sections, 13 Sections, 14 Sections, 15 Sections, 16 Sections, 17 Sections, 18 Sections, 19 Sections, 20 Sections, 21 Sections, 22 Sections, 23 Sections, 24 Sections, 25 Sections, 26 Sections, 27 Sections, 28 Sections, 29 Sections, 30 Sections |
|---|
The Cast Iron Louvre Airbrick suits Victorian, Edwardian, and inter-war residential and commercial properties where the louvre-pattern vent was the standard specification. It is the correct like-for-like replacement on listed buildings and conservation area properties, and suits new heritage-style construction requiring an authentic period ventilation grille.
A hit and miss vent has a sliding plate on the reverse of the grille that can be moved to open or close the ventilation apertures. This allows airflow to be regulated without removing or replacing the grille. The vent can be fully open, partially open, or fully closed depending on ventilation requirements.
The School Board Airbrick is suited to Victorian and Edwardian terraced housing, mid-century school buildings, civic halls, public baths, and converted institutional buildings. Its plain square-grid face matches the utilitarian aesthetic of late-Victorian construction and is also appropriate for new heritage-style builds in conservation areas.
The standards for our cast iron gutters and pipes have remained remarkably constant for many years. The physical properties of cast iron are sustained throughout its lifetime thus maintaining its effectiveness. Coupled with is durability and proper maintenance, we would expect our traditional cast iron rainwater products to last for over 50 years under normal conditions.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
The School Board Airbrick (F020801AFC) is available in three standard sizes: 225mm × 75mm, 225mm × 150mm, and 225mm × 225mm. These correspond to one-, two-, and three-brick-course heights and allow ventilation requirements to be met across a range of subfloor and wall opening sizes.
The satin chrome telescopic rooflight hand winder is well suited to contemporary and transitional interiors where a brushed chrome finish complements modern or minimal ironmongery. It is compatible with Lumen Rooflights and timber-framed skylights.
Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.
Yes. The polished chrome telescopic rooflight hand winder opener is compatible with Lumen Rooflights and most timber-framed skylights. Call 0333 987 4452 to confirm compatibility with a specific rooflight model.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
