Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £107.80 through £167.80 ex VAT (£129.36 – £201.36 inc VAT)
Socketless cast iron below-ground and suspended drainage system made to BS EN 877. Puddle Flange, available in 100mm, 150mm, 200mm. Cast iron, supplied factory coated.
Product codes: HD4078 (100mm), HD6078 (150mm), HD8078 (200mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Drain is a socketless cast iron drainage system made to BS EN 877, for below-ground drainage and suspended drainage runs in basements, undercrofts and plant areas. Plain-ended pipes and fittings are joined with bolted couplings. The result is a rigid, non-combustible system that resists crushing and root ingress, and copes with the loads found under buildings and hard landscaping.
A puddle flange that fixes around the pipe where it passes through a concrete slab or wall, sealing against water tracking along the outside of the pipe.
Available in 3 sizes, from 100mm to 200mm. Nominal weights run from 4 kg (100mm) to 7 kg (200mm).
Typical use: Pipes passing through basement walls, ground slabs and roof slabs.
| Size | Product code | Nominal weight |
|---|---|---|
| 100mm | HD4078 | 4 kg |
| 150mm | HD6078 | 6 kg |
| 200mm | HD8078 | 7 kg |
Often used with: Double Spigot Pipe 3m, Ductile Iron Coupling, 88° Long Radius Bend with Heel Rest.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 100mm (HD4078), 150mm (HD6078), 200mm (HD8078).
Wherever the pipe passes through concrete that must stay watertight, such as a basement wall or a ground slab. It is cast into the concrete with the pipe.
| Size | 100mm, 150mm, 200mm |
|---|
A hit and miss vent has a sliding plate on the back of the grille that can be opened, partially restricted, or closed entirely without removing the vent from the wall. This allows airflow to be controlled from inside the building, making it suitable for underfloor void ventilation and through-wall ventilation where adjustable airflow is needed.
For rooflights directly above a worktop or sink, a telescopic screw-jack hand winder is the most practical choice. Available in polished brass, satin chrome, and polished chrome, these openers allow controlled ventilation from a fixed handle position without requiring a pole. The 150mm or 250mm size is typically appropriate for standard-height kitchen rooflights.
Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for all listed building grades. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.
Prices for each item are shown on the product pages, ex VAT. For a full schedule and quotation, send drawings or photographs showing the stack height and the connections, then call 0333 987 4452 or use the contact form.
Prices are shown on the product page. For project quantities, multiple pattern orders, or a formal quotation, call 0333 987 4452 or use the contact form.
Prices are shown on the product page. For project quantities, specification support, or a formal quotation, call 0333 987 4452 or use the contact form.
Yes. Polished brass is a historically appropriate finish for period and listed buildings and is generally acceptable to conservation officers. If your project requires specific confirmation, we are happy to advise — call 0333 987 4452.
Prices are shown on each product page for both sizes and all three finishes. For project quantities, specification support, or conservation enquiries, call us on 0333 987 4452 or use the contact form on our website.
We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.
The H532 measures 560mm wide x 290mm deep x 305mm high, making it well suited to a broad, low-profile design suited to substantial roofs and box gutters on period commercial and civic buildings.
