Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £121.40 through £298.50 ex VAT (£145.68 – £358.20 inc VAT)
Socketless cast iron below-ground and suspended drainage system made to BS EN 877. 88° Long Radius Bend with Heel Rest, available in 100mm, 150mm. Cast iron, supplied factory coated.
Product codes: HD4014 (100mm), HD6014 (150mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Drain is a socketless cast iron drainage system made to BS EN 877, for below-ground drainage and suspended drainage runs in basements, undercrofts and plant areas. Plain-ended pipes and fittings are joined with bolted couplings. The result is a rigid, non-combustible system that resists crushing and root ingress, and copes with the loads found under buildings and hard landscaping.
An 88° long radius bend with a cast heel that sits on a base or support, so the weight of the stack is carried at the bend rather than by the drain below.
Available in 2 sizes, from 100mm to 150mm. Nominal weights run from 5.5 kg (100mm) to 11.4 kg (150mm).
Typical use: The foot of a vertical stack where it turns into a below-ground or suspended drain.
| Size | Product code | Nominal weight |
|---|---|---|
| 100mm | HD4014 | 5.5 kg |
| 150mm | HD6014 | 11.4 kg |
Often used with: 88° Long Radius Bend, Double Spigot Pipe 3m, Puddle Flange.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 100mm (HD4014), 150mm (HD6014).
It carries the load of the stack above. The heel is bedded on concrete or a support so the bend, and the drain it feeds, are not left to take the weight.
On tall stacks, yes. The heel rest carries the base, and intermediate supports carry the stack at intervals so the lower joints are not overloaded.
| Size | 100mm, 150mm |
|---|
Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Yes. The Louvre Airbrick is dimensioned to standard brick course openings and is suitable for direct replacement of worn, broken, or missing original cast iron louvre grilles. If you are unsure of the size required, measure the opening in the brickwork rather than the existing damaged grille.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
For rooflights directly above a worktop or sink, a telescopic screw-jack hand winder is the most practical choice. Available in polished brass, satin chrome, and polished chrome, these openers allow controlled ventilation from a fixed handle position without requiring a pole. The 150mm or 250mm size is typically appropriate for standard-height kitchen rooflights.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
The Antique Black finish suits Victorian, Edwardian, and inter-war buildings where ventilation ironwork was painted rather than polished — estate houses, terrace housing, civic buildings, and rural properties. It is also correct for listed buildings and conservation area properties requiring like-for-like replacement of original ornamental cast iron vents.
Prices are shown on each product page for both sizes and all three finishes. For project quantities, specification support, or conservation enquiries, call us on 0333 987 4452 or use the contact form on our website.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
