Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £162.50 through £420.72 +VAT
Our LCC cast iron soil pipe systems and traditional cast iron LCC soil pipe provides a comprehensive offering of traditional socket and spigot pipes and fittings for soil and waste installations on the external facade of buildings.
Pipe Diameter Sizes Available:
50mm (2″) – cast iron LCC soil pipe
65mm (2.5″) – cast iron LCC soil pipe
75mm (3″) – cast iron LCC soil pipe
90mm (3.5″) – cast iron LCC soil pipe
100mm (4″) – cast iron LCC soil pipe
150mm (6″) – cast iron LCC soil pipe
Traditional Cast Iron LCC Soil Pipe Eared – 1829mm: S2001E, S2501E, S3001E, S3501E, S4001E, S6001E
Traditional Cast Iron LCC Soil Pipe Eared – 1219mm: S2004E, S2504E, S3004E, S3504E, S4004E, S6004E
Traditional Cast Iron LCC Soil Pipe Eared – 914mm: S2003E, S2503E, S3003E, S3503E, S4003E, S6003E
Traditional Cast Iron LCC Soil Pipe Eared – 610mm: S2002E, S2502E, S3002E, S3502E, S4002E, S6002E
The Traditional LCC cast iron soil pipe system is the heritage-accurate specification for above-ground soil and waste pipes on period and listed buildings. LCC — cast iron socket-and-spigot soil pipe — is the original construction method for external soil pipes on Victorian, Edwardian, and later period buildings, and remains the correct like-for-like replacement where conservation officers or listed building consent require cast iron to be retained. The system carries soil and waste from WCs, baths, basins, and other sanitary fittings down the external face of the building to the underground drain.
The LCC Soil Pipe Eared 1219mm is the medium-length eared cast iron soil pipe section. The 1219mm (4-foot) length is used where a shorter pipe run is required — at the top of a stack, near a connection point, or where cutting a full-length section would result in waste. Integral ears allow direct wall fixing without a separate bracket.
Available in six diameters: 50mm (2″), 65mm (2.5″), 75mm (3″), 90mm (3.5″), 100mm (4″), and 150mm (6″). Manufactured in cast iron. Part codes: S2004E, S2504E, S3004E, S3504E, S4004E, S6004E. For specification support, call 0333 987 4452.
The H1 is available to accept round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. The 65mm and 75mm variants measure 305mm wide by 197mm deep and 210mm high. The 100mm variant measures 355mm wide by 230mm deep and 240mm high. A 150mm connection option is also available — please contact the team for dimensions.
Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.
We are able to place dates and initials and insignia onto most of our flat faced rainwater hopper heads.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
The H527 measures 430mm wide x 195mm deep x 540mm high, making it well suited to Victorian villas and townhouses where a decorative leader head is wanted.
The Ornamental Airbrick is suited to Victorian villas, bay-fronted terraces, Gothic Revival institutional buildings, church halls, and civic buildings where decorative ironwork is part of the architectural language. It is also appropriate for listed buildings and conservation area properties where the airbrick is on a prominent elevation and the ventilation grille is expected to carry decorative character.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
The Iron Works Patterned Hit & Miss Vent suits Victorian and Edwardian buildings where decorative cast iron or brass ventilation grilles were part of the original specification — including terrace houses, civic buildings, churches, entrance halls, and estate properties. It is appropriate on listed buildings and conservation area properties as a like-for-like decorative vent replacement, and on new heritage-quality construction where period detailing is required.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Our hopper heads are available with a wide range of pipe connections to suit round, square, and rectangular downpipes. The Calnethorpe No.11 accepts round 65mm, 75mm, and 100mm; square 75×75mm, 100×100mm, and 125×125mm; and rectangular 100×75mm, 125×100mm, and 150×100mm. Connection options vary by model — please contact us to confirm availability for your chosen hopper.
