Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £16.00 through £157.50 ex VAT (£19.20 – £189.00 inc VAT)
Socketless cast iron soil, waste and rainwater system made to BS EN 877. Ductile Iron Coupling with Continuity, available in 50mm, 70mm, 100mm, 150mm, 200mm, 250mm, 300mm. Cast iron, supplied factory coated.
Product codes: HS2012 (50mm), HS3012 (70mm), HS4012 (100mm), HS6012 (150mm), HS8012 (200mm), HS10012 (250mm), HS12012 (300mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Soil is a socketless cast iron soil, waste and rainwater system made to BS EN 877. Plain-ended pipes and fittings are joined with stainless steel or ductile iron couplings, giving a slim, continuous line on a façade or in a service riser. Cast iron is non-combustible, quiet in use and very long-lived. That is why it remains the specification of choice for heritage buildings, tall stacks, and anywhere acoustic performance or fire safety matters.
A ductile iron coupling with an EPDM sealing gasket, supplied with grub screws that bite into the pipe to give electrical continuity across the joint. It clamps over two plain pipe ends or a pipe and a fitting.
Available in 7 sizes, from 50mm to 300mm. Nominal weights run from 0.7 kg (50mm) to 5.9 kg (300mm).
Typical use: Joints where earth continuity is specified, or as the standard coupling throughout a run.
| Size | Product code | Nominal weight |
|---|---|---|
| 50mm | HS2012 | 0.7 kg |
| 70mm | HS3012 | 0.8 kg |
| 100mm | HS4012 | 1.1 kg |
| 150mm | HS6012 | 2 kg |
| 200mm | HS8012 | 3.5 kg |
| 250mm | HS10012 | 4.8 kg |
| 300mm | HS12012 | 5.9 kg |
Often used with: Double Spigot Pipe 3m, Pipe Grip, Socket Adapter.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 50mm (HS2012), 70mm (HS3012), 100mm (HS4012), 150mm (HS6012), 200mm (HS8012), 250mm (HS10012), 300mm (HS12012).
The grub screws give a continuous electrical path from pipe to pipe, so the whole stack can be earth bonded. Many specifications call for it on internal stacks in commercial and public buildings.
Tighten the bolts evenly, alternating side to side, until the coupling halves meet or reach the torque in the installation guidance. Over-tightening one side first can pull the joint out of line.
| Size | 50mm, 70mm, 100mm, 150mm, 200mm, 250mm, 300mm |
|---|
Yes. Our telescopic screw-jack openers and pole-operated handles are compatible with Lumen Rooflight systems. They are also suitable for use with other timber-framed rooflights and skylights fitted with appropriate catches or stays. If you are unsure of compatibility, call us on 0333 987 4452 and we can advise.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.
Prices are shown on each product page. For project quantities, conservation specifications, or to discuss suitability for a listed building, call 0333 987 4452 or use the contact form.
The School Board Airbrick suits Victorian and Edwardian institutional, civic, and residential buildings where the square-grid airbrick pattern was standard — including school buildings, civic halls, estate housing, terrace houses, and warehouses. It is also appropriate on listed buildings and conservation area properties as a like-for-like replacement for worn square-grid cast iron vents.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Our hopper heads are available with a wide range of pipe connections to suit round, square, and rectangular downpipes. The Calnethorpe No.11 accepts round 65mm, 75mm, and 100mm; square 75×75mm, 100×100mm, and 125×125mm; and rectangular 100×75mm, 125×100mm, and 150×100mm. Connection options vary by model — please contact us to confirm availability for your chosen hopper.
Yes. Cast iron ornamental vents in period patterns are frequently specified on listed buildings and conservation area properties as like-for-like replacements for original Victorian ironwork. Conservation officers generally accept cast iron in period patterns without objection. We can supply specifications to support planning and listed building consent applications.
Casting of iron is an imperfect processs. It is possible with some cast iron radiators that you will get minor imperfections in the surface finish. When radiators are painted this will reduce and over the years every additional coat of paint applied will provide a smoother more equal finish.
Prices are shown on each product page for both sizes and all three finishes. For project quantities, specification support, or conservation enquiries, call us on 0333 987 4452 or use the contact form on our website.
