Tuscan Foundry Products Logo Black
Find out more about our products by giving us a call
0333 987 4452
Linkedin Envelope
Tuscan Foundry Products Logo Black

Established 1893   |   BS 460:2002 Certified   |   UK & International Supply   |   Expert Technical Support   |   0333 987 4452

Traditional Express Soil Pipe System Double Spigot Pipe 1.5m - 1.8m Lengths
CODE Select an option Category

Double Spigot Pipe 1.5m – 1.8m Lengths

Price range: £91.90 through £135.00 ex VAT (£110.28 – £162.00 inc VAT)

Double spigot cast iron soil pipe in 1.5m and 1.8m lengths for the Traditional Express push-fit system.

Palletised UK delivery from £80. Please ensure suitable access and means of unloading on site. See delivery rates.

The Traditional Express double spigot pipe in 1.5m and 1.8m lengths is the shorter straight pipe in our push-fit cast iron soil system. Both ends are plain spigots that push into rubber-sealed push-fit sockets or couplings, so the stack goes up without caulking.

Use it on lower stacks and between fittings, where a 3m length would mean more cutting. Any cut end is still a spigot, so offcuts can be used elsewhere on the stack.

Sizes: 50mm (2″) × 1.5m and 100mm (4″) × 1.8m.

Cast iron to BS 416, with rubber joint seals to BS EN 681-1. Supplied in a factory black finish that can be overpainted, including in our linseed oil finish.

Suitable for listed buildings and conservation area work. For specification advice, a full schedule or a quotation, call 0333 987 4452 or use the contact form.

Comparing push-fit and caulked soil pipe? Read our Traditional Express vs LCC guide or the soil pipe FAQs.

Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.

Additional information

FAQ Categories

All FAQ
What sizes does the double spigot pipe come in?
It is available in 50mm diameter at 1.5m length and 100mm diameter at 1.8m length, both cast iron push-fit for use with the Traditional Express soil pipe system.
What is a double spigot pipe used for?
A double spigot pipe has a plain end at each end, rather than a socket, and is used together with push-fit sockets and fittings to extend or make up a pipe run to the required length.
Is the Traditional Express range suitable for listed buildings?
Yes. Traditional Express is a cast iron push-fit soil system made to BS 416, with rubber joint seals to BS EN 681-1, and is appropriate for listed buildings, conservation areas and heritage projects.
What finish does the double spigot pipe come in?
It is supplied with a pre-painted black gloss finish as standard. Please contact us to discuss alternative finish requirements.
How much does the double spigot pipe cost?
Prices for each size and option are shown on this page, ex VAT. For a full schedule or a project quotation, please call 0333 987 4452 or use the contact form.

Related products