Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £142.90 through £276.90 ex VAT (£171.48 – £332.28 inc VAT)
Coupling-jointed cast iron soil and waste system, compatible with BS 416 pipework. P Trap with Access, available in 50mm, 70mm, 100mm, 150mm. Cast iron, supplied factory coated.
Product codes: MS2050 (50mm), MS3050 (70mm), MS4050 (100mm), MS6050 (150mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The Tuscan Mechanical BS416 Soil range is a coupling-jointed cast iron soil and waste system, dimensionally compatible with BS 416 pipework. Plain-ended pipes and fittings are joined with bolted ductile iron couplings, so there are no caulked or sealed sockets. A stack goes together quickly, and individual fittings can be taken out later without disturbing the rest of the run. Conversion couplings join it to existing socketed LCC pipe, which makes it a practical choice for repairs and extensions to older stacks as well as new work.
A cast iron P trap with a bolted access door. It holds a water seal against foul air, and the door lets the trap be cleared without dismantling it.
Available in 4 sizes, from 50mm to 150mm. Nominal weights run from 2.3 kg (50mm) to 15.8 kg (150mm).
Typical use: Trapped connections such as floor outlets, rainwater discharging to a combined drain and appliance connections.
| Size | Product code | Nominal weight |
|---|---|---|
| 50mm | MS2050 | 2.3 kg |
| 70mm | MS3050 | 3.6 kg |
| 100mm | MS4050 | 6.8 kg |
| 150mm | MS6050 | 15.8 kg |
Often used with: Double Spigot Pipe 3m, Ductile Iron Coupling with Continuity, 15° Short Radius Bend.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 50mm (MS2050), 70mm (MS3050), 100mm (MS4050), 150mm (MS6050).
Traps collect debris. The door lets you clear the trap in place rather than breaking the joints.
Yes, where rainwater discharges into a combined sewer. The trap stops sewer gases venting through the downpipe.
| Size | 50mm, 70mm, 100mm, 150mm |
|---|
Yes. Tuscan Foundry Products cast iron rainwater goods are manufactured to BS 460:2002, the British Standard specification for cast iron rainwater goods. BS 460 compliance is often required by conservation officers and heritage bodies when specifying rainwater systems for listed buildings and conservation area properties.
Size selection depends on the distance between the mounting point and the rooflight frame, and the desired throw (opening distance). Our telescopic openers are available in 150mm, 250mm, and 300mm; the screw-jack stay is available in 300mm with a 250mm throw. For guidance on sizing for your specific rooflight, please call 0333 987 4452 or use the contact form.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Traditional Express can be painted, including in our linseed oil finish. LCC is supplied with a black bitumen coating, which cannot be reliably overpainted with conventional paints; maintain it with a compatible bituminous paint. Where a painted soil stack is required, specify Traditional Express.
Where a standard profile can't match an existing design, we offer a bespoke casting service in association with our pattern makers, typically with a 12–14 week lead time. Please call 0333 987 4452 or use the contact form to discuss your project.
The satin chrome telescopic rooflight hand winder opener is available to order at tuscanfoundry.com. For project or volume enquiries, call 0333 987 4452 or use the contact form on our website.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
