Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £496.20 through £3,489.50 ex VAT (£595.44 – £4,187.40 inc VAT)
Socketless cast iron below-ground and suspended drainage system made to BS EN 877. Rectangular Inspection Chamber, 2 Branch, available in 100mm x 100mm, 150mm x 100mm, 150mm x 150mm, 200mm x 200mm, 250mm x 250mm. Cast iron, supplied factory coated.
Product codes: HD4481 (100mm × 100mm), HD6481 (150mm × 100mm), HD6681 (150mm × 150mm), HD8881 (200mm × 200mm), HD101081 (250mm × 250mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Drain is a socketless cast iron drainage system made to BS EN 877, for below-ground drainage and suspended drainage runs in basements, undercrofts and plant areas. Plain-ended pipes and fittings are joined with bolted couplings. The result is a rigid, non-combustible system that resists crushing and root ingress, and copes with the loads found under buildings and hard landscaping.
A rectangular cast iron inspection chamber with two branch inlets and a bolted cover. It gives access at a junction in the drain.
Available in 5 sizes, from 100mm × 100mm to 250mm × 250mm. Nominal weights run from 10.2 kg (100mm × 100mm) to 68.1 kg (250mm × 250mm).
Typical use: Junctions in below-ground and suspended drainage.
| Size | Product code | Nominal weight |
|---|---|---|
| 100mm × 100mm | HD4481 | 10.2 kg |
| 150mm × 100mm | HD6481 | 14.9 kg |
| 150mm × 150mm | HD6681 | 18 kg |
| 200mm × 200mm | HD8881 | 40 kg |
| 250mm × 250mm | HD101081 | 68.1 kg |
Often used with: Rectangular Inspection Chamber, 4 Branch, Double Spigot Pipe 3m, Ductile Iron Coupling.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 100mm × 100mm (HD4481), 150mm × 100mm (HD6481), 150mm × 150mm (HD6681), 200mm × 200mm (HD8881), 250mm × 250mm (HD101081).
It gives sealed access at junctions inside buildings and in suspended drainage, where an open brick or plastic chamber would not be suitable.
| Size | 100mm x 100mm, 150mm x 100mm, 150mm x 150mm, 200mm x 200mm, 250mm x 250mm |
|---|
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for all listed building grades. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.
The H542A measures 240mm wide x 240mm deep x 290mm high, making it well suited to a compact square profile suited to smaller Georgian and Victorian properties, extensions and outbuildings.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
A hit and miss vent has a sliding plate on the reverse of the grille that can be moved to open or close the ventilation apertures. This allows airflow to be regulated without removing or replacing the grille. The vent can be fully open, partially open, or fully closed depending on ventilation requirements.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
The Calnethorpe is designed for formal classical and Georgian elevations where scale and material authenticity matter — large townhouses, country houses, manor houses, and institutional buildings. It is also widely specified for new-build heritage projects where cast iron rainwater goods are required to conservation standard.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Prices vary depending on size and finish. To get a quotation, please call 0333 987 4452 or use the contact form on the Tuscan Foundry website. The team can advise on the right specification for your project and provide a written quote.
Cast iron hopper heads from Tuscan Foundry are available in Standard Black (a factory-applied primer and topcoat finish) and Heritage Colours. A linseed oil paint finish is also available, providing a vapour-permeable, historically authentic coating that is particularly appropriate for listed buildings and conservation projects. Full finish specifications are available from the team.
