Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Call for Price
TFH23 – Large sand cast deep Og cast iron guttering.
This large Og cast iron rainwater system is suitable for larger
buildings and industrial and railway heritage projects, and is available in
the following sizes:
125 x 75mm
125 x 100mm
150 x 100mm
157 x 133mm
178 x 125mm
255 x 153mm
OG Pattern: No. 101, No. 101A, No. 101B, No. 101C, No. 101D, No.28
The TFH23 is a large sand cast deep ogee cast iron gutter — a substantial profile in the ogee family that combines the characteristic S-curve face of the ogee with a deeper than standard cross-section, giving significantly greater drainage capacity for large roof areas while retaining the decorative ogee character. Available in six sizes from 125×75mm to 255×153mm, the TFH23 range covers a very wide span of building types and drainage requirements.
Suitable for large Victorian and Edwardian buildings, industrial and railway heritage projects, major churches, civic architecture, and any heritage property where a deep ogee profile is either the original specification or the most appropriate heritage choice for the drainage load. Pattern references include No.101, No.101A, No.101B, No.101C, No.101D, and No.28.
The six available sizes make the TFH23 one of the most versatile profiles in the large sand cast range — specify the size that matches your existing installation or that your drainage calculations require. Sand cast iron, manufactured to BS 460:2002. Lead times are typically 8–10 weeks.
Suitable for: Large Victorian buildings, railway heritage, industrial conservation, churches, civic architecture. Call for price: 0333 987 4452.
A corner hopper head collects rainwater from two gutters running at right angles and channels it into a single downpipe. They are typically required at internal roof valleys, on hipped roofs, and wherever two runs of gutter converge at a corner. The Regent H1A is designed specifically for this application and is sized to suit the most common gutter profiles.
Yes. Our telescopic screw-jack openers and pole-operated handles are compatible with Lumen Rooflight systems. They are also suitable for use with other timber-framed rooflights and skylights fitted with appropriate catches or stays. If you are unsure of compatibility, call us on 0333 987 4452 and we can advise.
The H543 measures 504mm wide x 185mm deep x 200mm high, making it well suited to wide, shallow proportions that suit box-gutter outlets on period roofs, terraces and commercial premises.
We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.
A pole winder opener has a fixed-length arm, making it suited to standard rooflight positions with a consistent throw. A telescopic opener has an adjustable shaft, allowing it to accommodate varying rooflight positions and throw requirements. For guidance on which suits your project, call 0333 987 4452.
Satin chrome has a brushed, low-sheen finish suited to contemporary interiors, while polished chrome has a bright mirror finish. Both are available in the telescopic hand winder range at Tuscan Foundry. The choice typically depends on the existing ironmongery specification.
The right size depends on the width of your gutter run and the volume of water you need to collect. The Strayton H42A is available in four widths: 305mm (12"), 355mm (14"), 457mm (18"), and 610mm (24"). As a general guide, wider hoppers suit larger roof areas and heavier rainfall zones. If you are unsure, our team can advise based on your gutter profile and catchment area — call 0333 987 4452.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
It is possible for us to supply towel warmers with an electric heating element in them. The Electrad system is a unique system available to us, that enables independent heating of towel rails and radiators via the properties electrical system.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
