Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Call for Price
The Bransby No.126 is the most classical casting in this group: a wide, low head carrying two cast swags — festoons of drapery and foliage — across its front face.
The swag is one of the defining ornaments of Georgian and Regency architecture, found in plasterwork, on chimneypieces, in joinery and on ironwork. Here the pair sit within the flat field of the hopper, framed by moulded top and bottom edges, each hung between suspension points exactly as a carved festoon would be. Picked out in white against black, they read clearly from the ground and immediately place the casting in period.
This is a pattern for elevations with classical detailing already present — a country house, a good Georgian townhouse, an orangery or garden building, an assembly room or a civic building of the period. On a vernacular cottage or an industrial building it would look imported from somewhere grander.
Cast in solid iron to BS 460:2002, supplied in primer or black as standard, with heritage colours and traditional linseed oil finishes available on request.
Pipe connections: 65mm, 75mm and 100mm round; 75×75mm, 100×100mm and 125×125mm square; 100×75mm, 125×100mm and 150×125mm rectangular.
Suitable for listed buildings and conservation areas. Call 0333 987 4452 to discuss finishes for picked-out ornament.
| Finish | Primer, Black |
|---|---|
| Size | 565w x 260d x 335h to 150mmx125mm, 565w x 260d x 335h to 75mmx75mm, 565w x 260d x 335h to 125mmx125mm, 565w x 260d x 335h to 100mmx100mm, 565w x 260d x 335h to 125mmx100mm, 565w x 260d x 335h to 100mmx75mm, 565w x 260d x 335h to 100mm, 565w x 260d x 335h to 75mm, 565w x 260d x 335h to 65mm |
The Polished Lacquered finish suits buildings where period ironwork was finished bright rather than painted — formal entrance elevations, listed properties, and settings where the grille contributes to the decorative programme of the facade. It is appropriate for conservation specifications and high-specification heritage new build.
Yes. A polished brass finish is historically appropriate for period buildings and is generally acceptable to conservation officers for listed building projects. If you are unsure about the specification requirements for your project, we are happy to advise — call 0333 987 4452.
The H529 measures 430mm wide x 290mm deep x 540mm high, making it well suited to multi-storey Georgian and Victorian townhouses with a longer fall to the outlet.
Polished chrome has a bright mirror finish, while satin chrome has a brushed, low-sheen appearance. Both are available in the telescopic hand winder range. The finish choice typically depends on the ironmongery specification for the project.
The in-house Premier Extra coating is formulated for a life expectancy of around 10 years under normal weather conditions, provided any impact damage or surface scuffing is made good promptly. Coastal locations or higher pollution levels can shorten this, so it's worth asking your local stockist or paint manufacturer for site-specific advice.
For rooflights directly above a worktop or sink, a telescopic screw-jack hand winder is the most practical choice. Available in polished brass, satin chrome, and polished chrome, these openers allow controlled ventilation from a fixed handle position without requiring a pole. The 150mm or 250mm size is typically appropriate for standard-height kitchen rooflights.
Yes. The Brass Rooflight Pole Winder Opener 300mm is compatible with Lumen Rooflights and most timber-framed skylights. If you have a specific rooflight model, call 0333 987 4452 to confirm compatibility before ordering.
The School Board Airbrick (F020801AFC) is available in three standard sizes: 225mm × 75mm, 225mm × 150mm, and 225mm × 225mm. These correspond to one-, two-, and three-brick-course heights and allow ventilation requirements to be met across a range of subfloor and wall opening sizes.
A hit and miss vent has a sliding plate on the reverse of the grille that can be moved to open or close the ventilation apertures. This allows airflow to be regulated without removing or replacing the grille. The vent can be fully open, partially open, or fully closed depending on ventilation requirements.
Yes — we strongly recommend painting all products before installation to ensure full coverage on every surface, which reduces long-term maintenance. Standard Premier Rainwater products are supplied in a grey metal primer with rust inhibitors and need two undercoats and one top coat (or one undercoat and two top coats) of a good quality exterior paint.
