Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Call for Price
The Belmont No.97C is the corner form of our No.97 pattern: a plain, canted head drawn to seat properly where two elevations meet at an internal angle.
The body is square with the corners cut back, capped by a simple moulded top edge and tapering cleanly to the outlet. There is no applied ornament. Because the casting is symmetrical about its diagonal, it beds into a re-entrant angle without packing, modification or an awkward gap behind.
Corners are where rainwater goes wrong on older buildings. Two roof slopes discharge to a single point, the masonry there is often permanently shaded and slow to dry, and the junction is difficult to reach for inspection. Getting adequate capacity into that position, in a casting made for it, is straightforward preventive work.
It suits period domestic and estate buildings, courtyards, rear and service elevations, and any scheme where the corner needs solving quietly rather than decoratively.
Cast in solid iron to BS 460:2002, supplied in primer or black as standard, with heritage colours and traditional linseed oil finishes available on request.
Pipe connections: 65mm, 75mm and 100mm round; 75×75mm, 100×100mm and 125×125mm square; 100×75mm, 125×100mm and 150×125mm rectangular.
Suitable for listed buildings and conservation areas. Corner positions often warrant a site survey before specification. Call 0333 987 4452.
| Finish | Primer, Black |
|---|---|
| Size | 210w x 210d x 292h to 65mm, 210w x 210d x 292h to 75mm, 210w x 210d x 292h to 100mm, 210w x 210d x 292h to 100mmx75mm, 210w x 210d x 292h to 125mmx100mm, 210w x 210d x 292h to 150mmx125mm, 210w x 210d x 292h to 75mmx75mm, 210w x 210d x 292h to 100mmx100mm, 210w x 210d x 292h to 125mmx125mm |
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
The H529 measures 430mm wide x 290mm deep x 540mm high, making it well suited to multi-storey Georgian and Victorian townhouses with a longer fall to the outlet.
Our bespoke rise and fall gutter brackets — including fascia, side rafter, and top rafter variants for Osma Roofline and Osma SuperLine systems — are manufactured to order. The standard lead time is 10–14 working days from receipt of a confirmed order. If you have a programme deadline, please call us on 0333 987 4452 and we will advise on current availability.
Yes. All our mild steel brackets are supplied in either silver or black zinc plate. This coating protects the metal however, both will need painting prior to installation.
We have chosen to use zinc plating for two reasons; firstly that it is a more environmentally friendly than galvanising and secondly that it does not block up the threaded part of the rise and fall cups in the way that galvanising does.
Our cast iron hopper heads are available in a choice of finishes including primer, painted, and specialist heritage finishes. Please call us on 0333 987 4452 or submit an enquiry to discuss the right finish for your project.
Prices are shown on the product pages at tuscanfoundry.com. For project or volume enquiries, please call 0333 987 4452 or use the contact form on our website.
The H544 measures 380mm wide x 220mm deep x 418mm high, making it well suited to Georgian and Victorian townhouses and period commercial buildings.
Prices for standard cast iron hopper heads are shown on the product page. For larger quantities, bespoke sizing, heritage colour finishes, or full rainwater system specifications, please call 0333 987 4452 or use the contact form.
The Polished Lacquered finish suits buildings where period ironwork was finished bright rather than painted — formal entrance elevations, listed properties, and settings where the grille contributes to the decorative programme of the facade. It is appropriate for conservation specifications and high-specification heritage new build.
Yes. Polished brass is a historically appropriate finish for period and listed buildings and is generally acceptable to conservation officers. If your project requires specific confirmation, we are happy to advise — call 0333 987 4452.
