Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £668.60 through £802.30 ex VAT (£802.32 – £962.76 inc VAT)
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The Bagley No.107 is a deep, confident casting for elevations that need capacity and can carry a little weight at high level.
A stepped moulded cornice caps the head, projecting firmly to throw a strong shadow across the face. Below it the body tapers on all four sides in a long, unbroken sweep to the outlet — a greater depth than most patterns of comparable width, which is where its collecting capacity comes from. The surface is left plain, so the whole effect rests on proportion and on the crispness of the cornice above.
That depth is the practical argument for it. Where a single head takes discharge from a substantial roof area, or from a valley that delivers a sudden volume in heavy rain, the additional freeboard between normal water level and the rim is what prevents overflow down the face of the wall.
It suits Victorian domestic and institutional buildings, chapels, schools, mills and estate architecture — anywhere the original ironwork was substantial rather than decorative.
Cast in solid iron to BS 460:2002, supplied in primer or black as standard, with heritage colours and traditional linseed oil finishes available on request.
Pipe connections: 65mm, 75mm and 100mm round; 75×75mm, 100×100mm and 125×125mm square; 100×75mm, 125×100mm and 150×125mm rectangular.
Suitable for listed buildings and conservation areas. For flow rate calculations against a specific roof area, call 0333 987 4452.
| Weight | 7 kg |
|---|---|
| Finish | Primer, Black |
| Connection Size | 65mm Round, 75mm Round, 100mm Round, 100mm x 75mm Rectangular, 125mm x 100mm Rectangular, 150mm x 125mm Rectangular, 75mm x 75mm Square, 100mm x 100mm Square, 125mm x 125mm Square |
The polished chrome telescopic rooflight hand winder is suited to contemporary, Georgian-revival, and high-specification interiors where a bright chrome finish is required to complement existing ironmongery. It is compatible with Lumen Rooflights and timber-framed skylights.
A corner hopper head collects rainwater from two gutters running at right angles and channels it into a single downpipe. They are typically required at internal roof valleys, on hipped roofs, and wherever two runs of gutter converge at a corner. The Regent H1A is designed specifically for this application and is sized to suit the most common gutter profiles.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Our hopper heads are available with a wide range of pipe connections to suit round, square, and rectangular downpipes. The Calnethorpe No.11 accepts round 65mm, 75mm, and 100mm; square 75×75mm, 100×100mm, and 125×125mm; and rectangular 100×75mm, 125×100mm, and 150×100mm. Connection options vary by model — please contact us to confirm availability for your chosen hopper.
Yes. Our telescopic screw-jack openers and pole-operated handles are compatible with Lumen Rooflight systems. They are also suitable for use with other timber-framed rooflights and skylights fitted with appropriate catches or stays. If you are unsure of compatibility, call us on 0333 987 4452 and we can advise.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Prices are shown on each product page for both sizes and all three finishes. For project quantities, specification support, or conservation enquiries, call us on 0333 987 4452 or use the contact form on our website.
Satin chrome has a brushed, low-sheen finish suited to contemporary interiors, while polished chrome has a bright mirror finish. Both are available in the telescopic hand winder range at Tuscan Foundry. The choice typically depends on the existing ironmongery specification.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
