Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £43.00 through £74.80 ex VAT (£51.60 – £89.76 inc VAT)
Socketless cast iron below-ground and suspended drainage system made to BS EN 877. 30° Short Radius Bend, available in 100mm, 150mm. Cast iron, supplied factory coated.
Product codes: HD4006 (100mm), HD6006 (150mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Drain is a socketless cast iron drainage system made to BS EN 877, for below-ground drainage and suspended drainage runs in basements, undercrofts and plant areas. Plain-ended pipes and fittings are joined with bolted couplings. The result is a rigid, non-combustible system that resists crushing and root ingress, and copes with the loads found under buildings and hard landscaping.
A compact 30° short radius bend for changing direction in a tight space.
Available in 2 sizes, from 100mm to 150mm. Nominal weights run from 0.8 kg (100mm) to 1.1 kg (150mm).
Typical use: Changes of direction in below-ground and suspended drainage, set-offs and connections close to walls.
| Size | Product code | Nominal weight |
|---|---|---|
| 100mm | HD4006 | 0.8 kg |
| 150mm | HD6006 | 1.1 kg |
Often used with: 88° Long Radius Bend, Double Spigot Pipe 3m, Ductile Iron Coupling.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 100mm (HD4006), 150mm (HD6006).
A long radius bend is usually preferred there because it reduces back pressure and the risk of blockage. Short radius bends suit set-offs, branches and waste or vent runs.
Yes. Two matching bends with a short length of pipe between them step a run sideways. For common projections a ready-made offset fitting saves the extra joints.
| Size | 100mm, 150mm |
|---|
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
All of our cast iron radiators are availbale as standard with a 1/2″ BSP (15mm) connection. We are though also able to supply many of our radiators and valves with 3/4″ BSP connections. Due to the size proportions of some radiators and valves 3/4″ connections may be more suitable.
The Ornamental Airbrick is suited to Victorian villas, bay-fronted terraces, Gothic Revival institutional buildings, church halls, and civic buildings where decorative ironwork is part of the architectural language. It is also appropriate for listed buildings and conservation area properties where the airbrick is on a prominent elevation and the ventilation grille is expected to carry decorative character.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Prices are shown on the product page. For project quantities, multiple pattern orders, or a formal quotation, call 0333 987 4452 or use the contact form.
The H543 measures 504mm wide x 185mm deep x 200mm high, making it well suited to wide, shallow proportions that suit box-gutter outlets on period roofs, terraces and commercial premises.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Casting of iron is an imperfect processs. It is possible with some cast iron radiators that you will get minor imperfections in the surface finish. When radiators are painted this will reduce and over the years every additional coat of paint applied will provide a smoother more equal finish.
