Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £102.30 through £493.40 ex VAT (£122.76 – £592.08 inc VAT)
Socketless cast iron below-ground and suspended drainage system made to BS EN 877. Taper Pipe, available in 150mm x 100mm, 200mm x 100mm, 200mm x 150mm, 250mm x 100mm, 250mm x 150mm, 250mm x 200mm, 300mm x 150mm, 300mm x 200mm, 300mm x 250mm. Cast iron, supplied factory coated.
Product codes: HD6048 (150mm × 100mm), HD8046 (200mm × 100mm), HD8047 (200mm × 150mm), HD10046 (250mm × 100mm), HD10047 (250mm × 150mm), HD10048 (250mm × 200mm), HD12046 (300mm × 150mm), HD12047 (300mm × 200mm), HD12048 (300mm × 250mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Drain is a socketless cast iron drainage system made to BS EN 877, for below-ground drainage and suspended drainage runs in basements, undercrofts and plant areas. Plain-ended pipes and fittings are joined with bolted couplings. The result is a rigid, non-combustible system that resists crushing and root ingress, and copes with the loads found under buildings and hard landscaping.
A taper pipe that joins two different diameters in the same run.
Available in 9 sizes, from 150mm × 100mm to 300mm × 250mm. Nominal weights run from 2.4 kg (150mm × 100mm) to 9.9 kg (300mm × 250mm).
Typical use: Changing pipe size within a stack or drain, or connecting to an existing pipe of a different size.
| Size | Product code | Nominal weight |
|---|---|---|
| 150mm × 100mm | HD6048 | 2.4 kg |
| 200mm × 100mm | HD8046 | 4 kg |
| 200mm × 150mm | HD8047 | 4 kg |
| 250mm × 100mm | HD10046 | 5 kg |
| 250mm × 150mm | HD10047 | 6 kg |
| 250mm × 200mm | HD10048 | 6.2 kg |
| 300mm × 150mm | HD12046 | 9.1 kg |
| 300mm × 200mm | HD12047 | 9.3 kg |
| 300mm × 250mm | HD12048 | 9.9 kg |
Often used with: Double Spigot Pipe 3m, Ductile Iron Coupling, 45° Single Unequal Branch.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 150mm × 100mm (HD6048), 200mm × 100mm (HD8046), 200mm × 150mm (HD8047), 250mm × 100mm (HD10046), 250mm × 150mm (HD10047), 250mm × 200mm (HD10048), 300mm × 150mm (HD12046), 300mm × 200mm (HD12047), 300mm × 250mm (HD12048).
By the two diameters it joins, larger first. A 100mm × 50mm taper joins a 100mm pipe to a 50mm pipe.
A drain should not reduce in the direction of flow. Tapers are normally used to increase size downstream, or to connect a smaller branch drain.
| Size | 150mm x 100mm, 200mm x 100mm, 200mm x 150mm, 250mm x 100mm, 250mm x 150mm, 250mm x 200mm, 300mm x 150mm, 300mm x 200mm, 300mm x 250mm |
|---|
Prices vary depending on size and finish. To get a quotation, please call 0333 987 4452 or use the contact form on the Tuscan Foundry website. The team can advise on the right specification for your project and provide a written quote.
The Antique Black finish is cast iron with a blackened surface — the most historically accurate finish for cast iron ironwork and the most appropriate for the majority of heritage applications. Polished Lacquered is cast iron with a bright polished surface sealed with clear lacquer, suited to interiors and sheltered locations where polished ironwork is the specification. Polished Brass is solid polished brass throughout — the correct choice where existing building fittings are in brass or where a warm metal tone is required.
Each radiator is priced by the number of sections, from 3 to 30, so you only pay for the length you need. Prices are shown on each product page, and delivery is a flat £95 plus VAT per radiator order. Please call 0333 987 4452 or use the contact form for a quotation.
Yes. The Brass Rooflight Pole Winder Opener 300mm is compatible with Lumen Rooflights and most timber-framed skylights. If you have a specific rooflight model, call 0333 987 4452 to confirm compatibility before ordering.
The right size depends on the width of your gutter run and the volume of water you need to collect. The Strayton H42A is available in four widths: 305mm (12"), 355mm (14"), 457mm (18"), and 610mm (24"). As a general guide, wider hoppers suit larger roof areas and heavier rainfall zones. If you are unsure, our team can advise based on your gutter profile and catchment area — call 0333 987 4452.
The handle is compatible with Lumen Rooflights and most pole-operated rooflight and skylight systems. If you are unsure whether it suits your specific rooflight, call us on 0333 987 4452 and we can advise.
Our hopper heads are available with a wide range of pipe connections to suit round, square, and rectangular downpipes. The Calnethorpe No.11 accepts round 65mm, 75mm, and 100mm; square 75×75mm, 100×100mm, and 125×125mm; and rectangular 100×75mm, 125×100mm, and 150×100mm. Connection options vary by model — please contact us to confirm availability for your chosen hopper.
The Pultney Tapered Hopper Head is available in three pipe connection sizes: 65mm (2.5"), 75mm (3"), and 100mm (4"). Each size connects directly to matching cast iron downpipes via spigot and socket. Compatible downpipe codes are: 65mm — RH025, XRH025; 75mm — RH03, XRH03; 100mm — RH04, XRH04.
The louvre face provides directional airflow and offers some resistance to driven rain entering the subfloor void, making it a practical choice for exposed elevations or properties in areas with significant prevailing wind and rainfall. The square-grid (school board) pattern offers a larger open ventilation area but less weather protection.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
