Tuscan Foundry Products Logo Black
Find out more about our products by giving us a call
0333 987 4452
Linkedin Envelope
Tuscan Foundry Products Logo Black

Established 1893   |   BS 460:2002 Certified   |   UK & International Supply   |   Expert Technical Support   |   0333 987 4452

H25S socket and spigot large cast iron gutter
CODE TFH25S Category

Cast Iron Large Sand Cast Socket and Spigot Gutter (TFH25S)

Call for Price

H25S – Large sand cast socket and spigot box guttering.
This large cast iron box gutter is suitable for larger
buildings and industrial and railway heritage projects, and is available in
the following sizes:

150 x 150mm

The TFH25S is a large sand cast socket and spigot box gutter in the 150×150mm size — a square-sectioned profile providing substantial drainage capacity in a form suited to parapet gutters, valley gutters, and other applications where a concealed or near-flush cast iron gutter is required rather than an exposed decorative profile.

The 150×150mm section makes the TFH25S one of the larger box gutter profiles in the range, appropriate for buildings with significant roof catchment areas and where the drainage load demands a very large cross-section. Typically specified on large Victorian civic buildings, churches, industrial heritage sites, and estate buildings.

Sand cast iron, manufactured to BS 460:2002. Supplied in grey primer or black painted finish. Lead times are typically 8–10 weeks. Contact Tuscan Foundry Products to discuss your project requirements before ordering.

Suitable for: Parapet and valley gutters, large civic buildings, churches, industrial and estate heritage. Call for price: 0333 987 4452.

Additional information

FAQ Categories

All FAQ
What are large sand cast cast iron gutters?
Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.
Who are large sand cast gutters suitable for?
Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.
How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?
Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

Related products