Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Call for Price
TFH14 – Large moulded cast iron guttering.
This large moulded cast iron rainwater system is suitable for larger
buildings and industrial and railway heritage projects, and is available in
the following sizes:
125 x 115mm
150 c 100mm
150 x 115mm
The TFH14 is a large sand cast moulded cast iron gutter in the 150×100mm size, suited to larger buildings and heritage projects where the roof area and drainage load demand a profile beyond standard stock dimensions. The moulded cross-section provides a traditional shaped face appropriate for Victorian and Edwardian architecture of scale — country houses, civic buildings, churches, schools, and large institutional properties.
Available in 150×100mm. The TFH14 is typically specified for projects where a larger moulded profile is required to match an existing installation, or where a standard 125mm moulded ogee is insufficient for the calculated drainage load.
Sand cast iron, manufactured to BS 460:2002. Supplied in grey primer or black painted finish. Lead times are typically 8–10 weeks. Contact Tuscan Foundry Products to discuss your project requirements.
Suitable for: Large period properties, civic buildings, churches, institutional architecture, railway and industrial heritage. Call for price: 0333 987 4452.
Cast iron hopper heads are priced on enquiry due to the range of connection and finish options available. Please call us on 0333 987 4452 or use the contact form and we will respond promptly with a quotation tailored to your project requirements.
The Brass Rooflight Hand Winder Opener – Telescopic is available in 150mm, 250mm, and 300mm sizes. The telescopic mechanism provides flexibility to accommodate varying rooflight positions and throw requirements. Throw: 165mm.
Yes. Churches and ecclesiastical buildings are one of our most common project types. We regularly supply large sand cast gutters, rectangular and square downpipes, and bespoke hopper heads for church restorations. Many churches have non-standard profiles that require copy casting. We work directly with architects, church fabric advisors, and quinquennial inspection surveyors. Historic England and many Diocesan Advisory Committees specify cast iron as the appropriate material for listed ecclesiastical buildings.
The Regent H1 is well suited to Victorian and Edwardian terraces, listed commercial buildings, civic and institutional properties, and ecclesiastical buildings where a traditional funnel-form hopper is architecturally appropriate. Its multi-faceted tapering body reads as period-accurate on Gothic and classical building types alike, and it is a commonly specified choice for conservation and listed building projects across the UK.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
The H530 measures 330mm wide x 150mm deep x 350mm high, making it well suited to Georgian and Victorian terraces, where a compact, narrow footprint is needed.
The H534 measures 430mm wide x 240mm deep x 366mm high, making it well suited to Victorian villas and townhouses.
The Iron Works Patterned Hit & Miss Vent suits Victorian and Edwardian buildings where decorative cast iron or brass ventilation grilles were part of the original specification — including terrace houses, civic buildings, churches, entrance halls, and estate properties. It is appropriate on listed buildings and conservation area properties as a like-for-like decorative vent replacement, and on new heritage-quality construction where period detailing is required.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
