Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Call for Price
TFH10 – Large moulded cast iron guttering.
This large moulded cast iron rainwater system is suitable for larger
buildings and industrial and railway heritage projects, and is available in
the following sizes:
125 x 100mm
190 x 114mm
200 x 150mm
250 x 180mm
The TFH10 is a large sand cast moulded ogee gutter suited to substantial Victorian and Edwardian buildings with large roof areas requiring a higher-capacity ogee-profile system than standard stock profiles can provide. The moulded ogee cross-section provides the characteristic decorative S-curve face familiar from period architecture, in a larger section depth appropriate for country houses, civic buildings, churches, schools, and institutional heritage properties.
Available in three sizes: 150×100mm, 175×100mm, and 200×100mm. This range of sizes allows the TFH10 to be matched to a wide range of large building types and roof catchment areas. Sand cast iron, manufactured to BS 460:2002. Supplied in grey primer or black painted finish.
Fittings, angles, stop ends, outlets, and brackets to match are available. As a sand cast bespoke profile, lead times are typically 8–10 weeks. Contact Tuscan Foundry Products to discuss sizing, fittings, and project requirements before ordering.
Suitable for: Country houses, civic buildings, churches, institutional and heritage buildings with large roof areas. Call for price: 0333 987 4452.
The Cast Iron Louvre Airbrick suits Victorian and Edwardian terraced housing, semi-detached properties, public houses, agricultural buildings, and workshop structures where the original airbrick was a louvre-face grille. The horizontal fin profile is widely found in British domestic and light industrial construction from the 1870s through to the 1950s.
The H528 measures 760mm wide x 370mm deep x 565mm high, making it well suited to the largest properties in the range — substantial country houses, civic buildings and ecclesiastical projects.
Prices are shown on the product page. For project quantities, specification support, or a formal quotation, call 0333 987 4452 or use the contact form.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
A hit and miss vent has a sliding plate on the back of the grille that can be opened, partially restricted, or closed entirely without removing the vent from the wall. This allows airflow to be controlled from inside the building, making it suitable for underfloor void ventilation and through-wall ventilation where adjustable airflow is needed.
The H541 measures 274mm wide x 130mm deep x 330mm high, making it well suited to a slender profile suited to narrow Georgian townhouses and terraces where space is limited.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.
The School Board Airbrick suits Victorian and Edwardian institutional, civic, and residential buildings where the square-grid airbrick pattern was standard — including school buildings, civic halls, estate housing, terrace houses, and warehouses. It is also appropriate on listed buildings and conservation area properties as a like-for-like replacement for worn square-grid cast iron vents.
Tuscan Foundry supplies screw-jack rooflight openers in polished brass, satin chrome, and polished chrome finishes. Options include telescopic hand-winder openers in 150mm, 250mm, and 300mm sizes, fixed screw-jack stays, and pole-operated handles for high-level rooflights. All are designed for timber-framed rooflights and skylights.
