Cragside is a Victorian country house in Rothbury, Northumberland, designed by architect Norman Shaw and built for industrialist William Armstrong between 1863 and 1895. It was the first house in the world to be lit by hydroelectric power. It is a Grade I listed building and Scheduled Monument, managed by the National Trust and open to visitors.

What architectural style is Cragside?

Cragside is built in the Old English or Arts and Crafts style, with a dramatic multi-gabled silhouette set into a rocky hillside in Northumberland. The design by Norman Shaw features extensive timber framing, ornate brickwork, and complex rooflines requiring a substantial cast iron rainwater system.

What rainwater systems are appropriate for Victorian country houses like Cragside?

Victorian country houses typically feature cast iron gutters, downpipes, and ornamental hopper heads integral to the architectural character of the building. For complex multi-gabled rooflines, large-capacity cast iron profiles and bespoke castings are often required. Tuscan Foundry Products supplies heritage cast iron for National Trust and similar projects — call 0333 987 4452.

Does Tuscan Foundry supply cast iron guttering for Northumberland properties?

Yes. Tuscan Foundry Products supplies cast iron rainwater systems for listed and period buildings throughout Northumberland, including Victorian country houses, estate buildings, and ecclesiastical properties. Call 0333 987 4452 or email info@tuscanfoundry.com to discuss your project.

What cast iron guttering is appropriate for a period property in Kent?

Period properties in Kent typically feature Half Round or Ogee cast iron gutters depending on the building's age and style. Georgian and early Victorian properties commonly have Ogee profile; later Victorian and Edwardian properties often feature Half Round. Tuscan Foundry Products can advise on the most appropriate choice for your Kent property — call 0333 987 4452.

Do listed properties in Kent need cast iron guttering?

Listed buildings in Kent are required to maintain the character of the original building. Replacing cast iron guttering with uPVC is likely to require Listed Building Consent and is unlikely to be approved by Kent conservation officers. Like-for-like replacement in cast iron does not normally require consent. Tuscan Foundry Products supplies cast iron guttering for listed properties throughout Kent.

Does Tuscan Foundry deliver cast iron guttering to Kent?

Yes. Tuscan Foundry Products delivers cast iron gutters, downpipes, hoppers, and fittings to locations throughout Kent. We supply architects, conservation contractors, and private clients on listed and period buildings across the county. Call 0333 987 4452 or email info@tuscanfoundry.com to discuss your project.

What is a quinquennial inspection?

A quinquennial inspection is a mandatory five-yearly condition survey of a Church of England church, carried out by an approved architect or chartered building surveyor. It assesses the condition of all elements including the roof, rainwater drainage, walls, windows, and fittings, and produces a prioritised schedule of repairs.

What type of guttering is appropriate for a historic church?

Cast iron gutters and downpipes are the appropriate and most commonly specified rainwater system for historic churches. They match original drainage systems on Victorian, Georgian, and earlier ecclesiastical buildings, comply with BS 460:2002, and are acceptable to Diocesan Advisory Committees and conservation officers. Tuscan Foundry Products supplies cast iron church drainage systems — call 0333 987 4452 for guidance.

Does replacing church guttering require a faculty?

Replacing guttering like-for-like in the same material on a Church of England church typically falls within List A or List B of the Faculty Jurisdiction Rules 2015 and may not require a full faculty. Any change of material is likely to require a faculty. Always check with the Diocesan Advisory Committee before proceeding.

How long do cast iron gutters last on a church?

Cast iron gutters correctly installed, painted, and maintained can last in excess of 100 years on a church building. Regular repainting every 7-10 years and prompt attention to joint failures are the key maintenance tasks. Linseed oil paint is increasingly used on ecclesiastical buildings as a period-appropriate and durable finish.

Can Tuscan Foundry supply large-capacity gutters for churches?

Yes. Tuscan Foundry Products stocks large-capacity cast iron gutter profiles appropriate for the wide roof spans of churches, including Deep Half Round and Large Sand Cast profiles. Bespoke profiles are available where the original section is non-standard. Contact us on 0333 987 4452.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

Satin Chrome Rooflight Hand Winder Opener Telescopic

Size	300mm, 150mm, 250mm

What finishes are available on your cast iron hopper heads?

Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.

How long is the drive in spike on your rise and fall gutter bracket?

Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.

What is the Brass Rooflight Pole Winder Opener 300mm used for?

The Brass Rooflight Pole Winder Opener 300mm is a screw-jack operated rooflight opener designed for manual control of timber-framed skylights and Lumen Rooflights. The 300mm fixed arm is suited to standard rooflight positions and is finished in polished brass.

What does “hit and miss” mean on a ventilation grille?

A hit and miss vent has a sliding plate on the reverse of the grille that can be moved to open or close the ventilation apertures. This allows airflow to be regulated without removing or replacing the grille. The vent can be fully open, partially open, or fully closed depending on ventilation requirements.

Is a cast iron hopper head suitable for use on a listed building?

Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for use on all listed building classes. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.

Can the louvre airbrick be used to replace an existing cast iron ventilation grille?

Yes. The Louvre Airbrick is dimensioned to standard brick course openings and is suitable for direct replacement of worn, broken, or missing original cast iron louvre grilles. If you are unsure of the size required, measure the opening in the brickwork rather than the existing damaged grille.

How do I get a price for a cast iron hopper head?

Select your required size and finish options from the product page and add to cart for an instant price. For project quantities, bespoke requirements, or any specification queries, please call 0333 987 4452 or use the contact form at tuscanfoundry.com.

What sizes are the Iron Works Patterned Hit & Miss Vents available in?

Available in two sizes: 225mm x 82mm (single airbrick course height) and 225mm x 150mm (double course height). Both sizes fit standard brick coursing positions and install flush into the wall face.

Is a brass rooflight opener suitable for a listed building or conservation area?

Yes. Polished brass is a historically appropriate finish for period and listed buildings and is generally acceptable to conservation officers. If your project requires specific confirmation, we are happy to advise — call 0333 987 4452.

Do you sell or make ogee guttering as we have a round double bay turrett style roof to our victorian house.

We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.

Chrome (Satin) Rooflight Hand Winder Opener – Telescopic

Additional information

FAQ Categories

What finishes are available on your cast iron hopper heads?

How long is the drive in spike on your rise and fall gutter bracket?

What is the Brass Rooflight Pole Winder Opener 300mm used for?

What does “hit and miss” mean on a ventilation grille?

Is a cast iron hopper head suitable for use on a listed building?

Can the louvre airbrick be used to replace an existing cast iron ventilation grille?

How do I get a price for a cast iron hopper head?

What sizes are the Iron Works Patterned Hit & Miss Vents available in?

Is a brass rooflight opener suitable for a listed building or conservation area?

Do you sell or make ogee guttering as we have a round double bay turrett style roof to our victorian house.

Working together to make the world a brighter place

CONTACT US

FOLLOW US

MESSAGE US

ABOUT US

PRODUCTS

SUPPORT

CONTACT

Chrome (Satin) Rooflight Hand Winder Opener – Telescopic

Additional information

FAQ Categories

What finishes are available on your cast iron hopper heads?

How long is the drive in spike on your rise and fall gutter bracket?

What is the Brass Rooflight Pole Winder Opener 300mm used for?

What does “hit and miss” mean on a ventilation grille?

Is a cast iron hopper head suitable for use on a listed building?

Can the louvre airbrick be used to replace an existing cast iron ventilation grille?

How do I get a price for a cast iron hopper head?

What sizes are the Iron Works Patterned Hit & Miss Vents available in?

Is a brass rooflight opener suitable for a listed building or conservation area?

Do you sell or make ogee guttering as we have a round double bay turrett style roof to our victorian house.

Related products

Strand Duoflex Link Bar – 300mm

Round Bar Duplex Opener – Centre Ring

Highline T300 Operator