Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
£73.00 +VAT
The Brass Rooflight Hand Winder Opener – Telescopic is a screw-jack operated rooflight opener finished in polished brass. Designed for timber-framed rooflights and skylights, it combines mechanical simplicity with a warm, traditional aesthetic that sits comfortably in period and heritage interiors. Available in 150mm and 300mm sizes, the telescopic mechanism adjusts to accommodate varying rooflight positions and throw requirements.
The unit is constructed with a threaded screw-jack barrel and a right-angle crank handle, both in polished brass. The telescopic shaft allows positioning flexibility, and the mounting bracket provides a secure, direct fix to the rooflight frame. Throw: 165mm. Suitable for use with Lumen Rooflights and compatible timber-framed skylights.
This opener is well suited to period houses, Georgian and Victorian terraces, conservation area properties, traditional orangeries, and any project where a brass finish is specified to complement existing ironmongery or architectural metalwork. It is one of the most widely used rooflight openers in the Tuscan Foundry range.
Available in 150mm and 300mm sizes. For information on compatibility, fitting, or to discuss your project, call 0333 987 4452 or use the contact form on our website.
| Size | 300mm, 150mm, 250mm |
|---|
The standards for our cast iron gutters and pipes have remained remarkably constant for many years. The physical properties of cast iron are sustained throughout its lifetime thus maintaining its effectiveness. Coupled with is durability and proper maintenance, we would expect our traditional cast iron rainwater products to last for over 50 years under normal conditions.
Yes. Polished brass is a historically appropriate finish for period and listed buildings and is generally acceptable to conservation officers. If your project requires specific confirmation, we are happy to advise — call 0333 987 4452.
The Iron Works Patterned Hit & Miss Vents are available in two sizes: 225mm × 82mm (single-course, suitable for standard airbrick positions) and 225mm × 150mm (double-course format). Both sizes are available in all three finishes: Antique Black, Polished Lacquered, and Polished Brass.
Our cast iron airbricks are available in three standard sizes: 225mm × 75mm (single course), 225mm × 150mm (double course), and 225mm × 225mm (square format). These correspond to the standard airbrick positions used in Victorian and Edwardian brickwork. Each size is available across the School Board, Louvre, and Ornamental pattern ranges.
For rooflights directly above a worktop or sink, a telescopic screw-jack hand winder is the most practical choice. Available in polished brass, satin chrome, and polished chrome, these openers allow controlled ventilation from a fixed handle position without requiring a pole. The 150mm or 250mm size is typically appropriate for standard-height kitchen rooflights.
Satin chrome has a brushed, low-sheen finish suited to contemporary interiors, while polished chrome has a bright mirror finish. Both are available in the telescopic hand winder range at Tuscan Foundry. The choice typically depends on the existing ironmongery specification.
The Calnethorpe is designed for formal classical and Georgian elevations where scale and material authenticity matter — large townhouses, country houses, manor houses, and institutional buildings. It is also widely specified for new-build heritage projects where cast iron rainwater goods are required to conservation standard.
The Cast Iron Louvre Airbrick (F020802AFC) is available in 225mm × 75mm, 225mm × 150mm, and 225mm × 225mm — standard brick course heights. All sizes share a consistent depth for straightforward like-for-like replacement of original cast iron louvre airbricks.
The Polished Brass finish suits buildings where brass metalwork was standard — formal Victorian terrace housing, civic and institutional buildings, and high-quality estate architecture. It is appropriate on listed buildings and conservation properties where the wider ironmongery specification is in brass and a matching material is required.
Yes. Polished brass ironmongery is historically appropriate for period buildings and is generally acceptable to conservation officers for listed building projects. If you require confirmation for your specific scheme, we are happy to advise — call 0333 987 4452.
