Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £306.30 through £388.00 ex VAT (£367.56 – £465.60 inc VAT)
A genuine cast iron rainwater pattern the H16 or No.16 is available in two profile sizes. The profile is a larger version of the more traditional ogee (OG) curved pattern and offers increased capacity.
Cast Iron H16 Moulded Guttering: G830, G4301, G5401, XG4301, XG45401
Cast Iron Moulded46DC
Palletised UK delivery from £80. Please ensure suitable access and means of unloading on site. See delivery rates.
The H16 moulded cast iron gutter is a larger and more decorative version of the common ogee profile. Known as the H16 or No.16 moulded pattern, it shares the elegant S-curve cross-section of the ogee but with a deeper section, more pronounced moulded detail, and significantly greater drainage capacity. It is found on Victorian and Edwardian country houses, manor houses, civic and institutional buildings, hotels, large churches, and any substantial period property where the roof area and rainfall load demanded something beyond the standard common ogee.
This section is 1829mm (6 feet) in length, manufactured in solid cast iron to BS 460:2002. Available in two profile sizes: 125mm (5″) and 150mm (6″) by 100mm Deep ((6″). Supplied in primed or factory black finish as standard. The socket-and-spigot joint connects sections in a run, with union clips and jointing compound completing the watertight seal.
Accepted by conservation officers and listed building authorities as the appropriate heritage material for period properties where the G46 moulded pattern is the historically correct profile. The H16 is a pattern-specific gutter — angles, outlets, stop ends, brackets, and clips must all be from the H16 range, as fittings from the common ogee range are not compatible.
Where an existing H16installation has failed in part, the section can be matched precisely and supplied for a repair-and-replace specification, preserving the character of the original system without full replacement.
Part codes: G4301, G5401, XG4301, XG45401, Moulded 46DC, G830. For specification support or a project quotation, call 0333 987 4452.
| Size/Finish | Primer 125mm x 100mm, Primer 150mm x 100mm, Black 125mm x 100mm, Black 150mm x 100mm |
|---|
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
The H526 measures 440mm wide x 240mm deep x 460mm high, making it well suited to Victorian and Edwardian townhouses.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
The H525 measures 270mm wide x 208mm deep x 285mm high, making it well suited to smaller period properties, extensions and outbuildings.
Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for all listed building grades. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.
A hit and miss vent has a sliding plate on the back of the grille that can be opened, partially restricted, or closed entirely without removing the vent from the wall. This allows airflow to be controlled from inside the building, making it suitable for underfloor void ventilation and through-wall ventilation where adjustable airflow is needed.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Polished chrome has a bright mirror finish, while satin chrome has a brushed, low-sheen appearance. Both are available in the telescopic hand winder range. The finish choice typically depends on the ironmongery specification for the project.
The Pultney Tapered Hopper Head is well suited to Georgian and Regency townhouses, Victorian terraces, rural farmhouses, barns, and functional estate buildings where a plain, period-correct hopper is the appropriate specification. It also works well on new heritage-style construction. Its unfussy, chamfered form makes it a versatile choice across a wide range of traditional building types.
Yes. Bespoke copy casting is a core service at Tuscan Foundry Products. We can replicate any cast iron gutter, downpipe, hopper head, or fitting from drawings, detailed photographs, or a physical sample or surviving section. Each commission is assessed individually. Lead time is typically 8 to 10 weeks, and quantities as low as a single piece can be considered depending on pattern-making costs.
