Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £154.30 through £195.42 ex VAT (£185.16 – £234.50 inc VAT)
Nozzle (Centre Drop) for H16 Moulded Gutter
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The H16 No.16 nozzle centre drop connects the Regent No.16 moulded ogee gutter run to the downpipe via a central outlet position. The nozzle provides the transition from horizontal drainage to the vertical pipe drop while maintaining the moulded profile of the H16 at the outlet point — important on the large Victorian and Edwardian buildings where the visual consistency of the guttering system contributes to the architectural character of the elevation.
The H16 carries a right-hand internal joint, and nozzle outlets are handed accordingly. Because the H16 profile is asymmetric, the correct internal or external orientation must be identified before ordering. The nozzle cannot be reversed to compensate for an incorrect choice.
Manufactured in solid cast iron to BS 460:2002. Available in both H16 sizes: 125×100mm (5″×4″) and 150×100mm (6″×4″). Supplied in primed or factory black finish. For listed buildings and heritage projects where the H16 No.16 is the original profile. For specification support, call 0333 987 4452.
| Size/Finish | Primer 125mm x 100mm, Primer 150mm x 100mm, Black 125mm x 100mm, Black 150mm x 100mm |
|---|
Our cast iron hopper heads are available in a choice of finishes including primer, painted, and specialist heritage finishes. Please call us on 0333 987 4452 or submit an enquiry to discuss the right finish for your project.
The Pultney Tapered Hopper Head is available in three pipe connection sizes: 65mm (2.5"), 75mm (3"), and 100mm (4"). Each size connects directly to matching cast iron downpipes via spigot and socket. Compatible downpipe codes are: 65mm — RH025, XRH025; 75mm — RH03, XRH03; 100mm — RH04, XRH04.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
The H525 measures 270mm wide x 208mm deep x 285mm high, making it well suited to smaller period properties, extensions and outbuildings.
Select your required size and finish options from the product page and add to cart for an instant price. For project quantities, bespoke requirements, or any specification queries, please call 0333 987 4452 or use the contact form at tuscanfoundry.com.
Yes. The Louvre Airbrick is dimensioned to standard brick course openings and is suitable for direct replacement of worn, broken, or missing original cast iron louvre grilles. If you are unsure of the size required, measure the opening in the brickwork rather than the existing damaged grille.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Prices for our rooflight openers are shown on each product page. If you need multiple items, have a specific project in mind, or want to discuss compatibility, please call 0333 987 4452 or use the contact form at tuscanfoundry.com and we will be happy to assist.
Tuscan Foundry supplies screw-jack rooflight openers in polished brass, satin chrome, and polished chrome finishes. Options include telescopic hand-winder openers in 150mm, 250mm, and 300mm sizes, fixed screw-jack stays, and pole-operated handles for high-level rooflights. All are designed for timber-framed rooflights and skylights.
Available in two sizes: 225mm x 82mm (single airbrick course height) and 225mm x 150mm (double course height). Both sizes fit standard brick coursing positions and install flush into the wall face.
