Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £94.90 through £320.10 ex VAT (£113.88 – £384.12 inc VAT)
Socketless cast iron below-ground and suspended drainage system made to BS EN 877. 88° Double Radius Curve Branch, available in 100mm x 100mm, 150mm x 100mm. Cast iron, supplied factory coated.
Product codes: HD4038 (100mm × 100mm), HD6038 (150mm × 100mm).
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Drain is a socketless cast iron drainage system made to BS EN 877, for below-ground drainage and suspended drainage runs in basements, undercrofts and plant areas. Plain-ended pipes and fittings are joined with bolted couplings. The result is a rigid, non-combustible system that resists crushing and root ingress, and copes with the loads found under buildings and hard landscaping.
An 88° branch with two opposing swept inlets. Each inlet has a curved entry that turns the incoming flow downwards, reducing cross-flow between the two connections.
Available in 2 sizes, from 100mm × 100mm to 150mm × 100mm. Nominal weights run from 5.3 kg (100mm × 100mm) to 8.2 kg (150mm × 100mm).
Typical use: Back-to-back WCs or appliances on opposite sides of a stack.
| Size | Product code | Nominal weight |
|---|---|---|
| 100mm × 100mm | HD4038 | 5.3 kg |
| 150mm × 100mm | HD6038 | 8.2 kg |
Often used with: 88° Single Radius Curve Branch, Double Spigot Pipe 3m, Ductile Iron Coupling, Access Pipe with Round Door.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
It is available in 100mm × 100mm (HD4038), 150mm × 100mm (HD6038).
The swept entries direct each discharge down the stack rather than across it, which reduces the chance of one WC discharging into the other.
| Size | 100mm x 100mm, 150mm x 100mm |
|---|
The satin chrome telescopic rooflight hand winder opener is available to order at tuscanfoundry.com. For project or volume enquiries, call 0333 987 4452 or use the contact form on our website.
We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.
Prices for each item are shown on the product pages, ex VAT. For a full schedule and quotation, send drawings or photographs showing the stack height and the connections, then call 0333 987 4452 or use the contact form.
Casting of iron is an imperfect processs. It is possible with some cast iron radiators that you will get minor imperfections in the surface finish. When radiators are painted this will reduce and over the years every additional coat of paint applied will provide a smoother more equal finish.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
The satin chrome telescopic rooflight hand winder opener is available in multiple sizes. The telescopic mechanism adjusts to accommodate varying rooflight positions and throw requirements. For a full list of available sizes, visit tuscanfoundry.com or call 0333 987 4452.
The H527 measures 430mm wide x 195mm deep x 540mm high, making it well suited to Victorian villas and townhouses where a decorative leader head is wanted.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for all listed building grades. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.
