Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
£66.90 ex VAT (£80.28 inc VAT)
Socketless cast iron below-ground and suspended drainage system made to BS EN 877. 69° Single Equal Branch. Cast iron, supplied factory coated.
Product code: HD4025.
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Tuscan EN877 Drain is a socketless cast iron drainage system made to BS EN 877, for below-ground drainage and suspended drainage runs in basements, undercrofts and plant areas. Plain-ended pipes and fittings are joined with bolted couplings. The result is a rigid, non-combustible system that resists crushing and root ingress, and copes with the loads found under buildings and hard landscaping.
A 69° single branch with the inlet the same size as the main run.
Product code HD4025. Nominal weight 3.4 kg.
Typical use: Junctions where the branch is the same diameter as the stack or drain.
| Item | Product code | Nominal weight |
|---|---|---|
| 69° Single Equal Branch | HD4025 | 3.4 kg |
Often used with: 69° Single Unequal Branch, Double Spigot Pipe 3m, Ductile Iron Coupling, Access Pipe with Round Door.
Comparing systems? Our guide to choosing a cast iron soil pipe system sets out how LCC, Traditional Express, mechanical BS 416 and EN 877 differ.
Prices are per item, excluding VAT and delivery. Stock items are usually dispatched within 5 to 7 working days, and non-stock sizes within 7 to 10 working days. For a full stack or drainage schedule, or advice on the right fittings, call 0333 987 4452 or use the contact form.
The product code is HD4025. Nominal weight 3.4 kg.
A 69° branch gives a more swept entry than an 88° branch. It suits connections that approach the run at an angle, and drains where a gentler junction is wanted.
It can be, but a radius curve branch is generally preferred for WCs because its curved inlet turns the flow down the stack.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
A corner hopper head collects rainwater from two gutters running at right angles and channels it into a single downpipe. They are typically required at internal roof valleys, on hipped roofs, and wherever two runs of gutter converge at a corner. The Regent H1A is designed specifically for this application and is sized to suit the most common gutter profiles.
The School Board Airbrick suits Victorian and Edwardian institutional, civic, and residential buildings where the square-grid airbrick pattern was standard — including school buildings, civic halls, estate housing, terrace houses, and warehouses. It is also appropriate on listed buildings and conservation area properties as a like-for-like replacement for worn square-grid cast iron vents.
It is possible for us to supply towel warmers with an electric heating element in them. The Electrad system is a unique system available to us, that enables independent heating of towel rails and radiators via the properties electrical system.
Eared LCC pipe is fixed through ears cast on the socket. Plain LCC pipe is fixed with holdfasts driven into the mortar joint, screw-to-wall holderbats, build-in holderbats or loose ears. Fix every length below the socket so each joint is supported. Traditional Express uses adjustable brackets.
Yes. Cast iron is the material required by most conservation officers and listed building consents for the replacement or replication of traditional rainwater goods. Our hopper heads are produced in solid cast iron and we can assist with specification notes or material statements for planning purposes if required.
Prices are shown on the product page. For project quantities, specification support, or a formal quotation, call 0333 987 4452 or use the contact form.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
This opener is particularly well suited to period and heritage properties — Georgian and Victorian terraces, conservation area houses, traditional orangeries, and listed buildings where a brass finish is required to complement existing ironmongery. It is compatible with Lumen Rooflights and most timber-framed skylights.
