Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £118.90 through £175.10 ex VAT (£142.68 – £210.12 inc VAT)
Cast iron round ornamental pipe earband type D for cast iron pipe. Our round ornamental cast iron downpipe earbands are used instead of eared pipes or fittings.
Sizes Available:
65mm (2.5″) cast iron pipe
75mm (3″) cast iron pipe
100mm (4″) cast iron pipe
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Cast iron ornamental downpipe earbands for round rainwater downpipes: pattern type (D)
Tuscan Foundry Products offers one of the UK’s most comprehensive ranges of brackets and can manufacture bespoke products to match your existing brackets if required.
Technical
Ornamental cast iron rainwater pipe earbands are available for 65mm (2.5″), 75mm (3″) and 100mm (4″) cast iron downpipes.
| Pipe Size/Finish | Primer 65mm, Primer 75mm, Primer 100mm, Black Painted 65mm, Black Painted 75mm, Black Painted 100mm |
|---|
Cross-reference
| Primer 65mm | R25650D |
| Primer 75mm | R30650D |
| Primer 100mm | R40650D |
| Black Painted 65mm | XR25650D |
| Black Painted 75mm | XR30650D |
| Black Painted 100mm | XR40650D |
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
In most cases, replacing like-for-like cast iron guttering on a listed building does not require Listed Building Consent (LBC), provided the replacement matches the existing profile, material, and finish exactly. However, any change of material away from cast iron will almost always require consent. We recommend consulting your local conservation officer before proceeding, and we can provide specification documentation to support your application if required.
Select your required size and finish options from the product page and add to cart for an instant price. For project quantities, bespoke requirements, or any specification queries, please call 0333 987 4452 or use the contact form at tuscanfoundry.com.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Select your required size and finish options from the product page and add to cart for an instant price. For project quantities, bespoke requirements, or any specification queries, please call 0333 987 4452 or use the contact form at tuscanfoundry.com.
We manufacture a wide variety of brackets for many different cast iron gutter and pipe profiles. More common types are the rise and fall, top fix and side fix rafter and the holderbat or pipe clip.
We can also offer traditional drive brackets, repair brackets and fascia brackets in both steel and cast iron.
It is always advisable to replace like with like because quite often the brackets form and important part of the buildings architecture. Occasionally buildings have special decorative brackets and our UK manufacturing allows us to produce small quantities of bespoke brackets when required.
Prices for standard cast iron hopper heads are shown on the product page. For larger quantities, bespoke sizing, heritage colour finishes, or full rainwater system specifications, please call 0333 987 4452 or use the contact form.
Traditional Express (TX) is a cast iron push-fit soil system. Socketless pipes are joined with push-fit sockets and couplings using rubber seals, so there is no caulking on site. LCC uses caulked socket-and-spigot joints and a bitumen coating. TX is quicker to install and can be painted; LCC is the closer match to an original Victorian stack. Our Traditional Express vs LCC guide compares the two in detail.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Our cast iron airbricks are available in three standard sizes: 225mm × 75mm (single course), 225mm × 150mm (double course), and 225mm × 225mm (square format). These correspond to the standard airbrick positions used in Victorian and Edwardian brickwork. Each size is available across the School Board, Louvre, and Ornamental pattern ranges.
