Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £80.60 through £179.40 ex VAT (£96.72 – £215.28 inc VAT)
Our cast iron round rainwater pipe offset 230mm is a traditional cast iron round offset, suited to most period property renovations. Round cast iron pipe is available in primed and black as standard.
Sizes Available:
65mm (2.5″)
75mm (3″)
100mm (4″)
Our traditional cast iron rainwater pipe is available in 4 sizes. It is now common to see 2.5″ pipes used in place of the older 2″ sizing.
Measuring the projection: measured horizontally between the centre lines of the upper and lower pipe, not face to face. See the measuring diagram in the gallery, or our guide to measuring an offset for all sizes and a worked example.
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
Our traditional cast iron rainwater pipe is available in 3 sizes. It is now common to see 2.5″ pipes used in place of the older 2″ sizing.
Cast iron gutters and pipes offer great strength and durability, a proven history of long life, low noise operation and fire resistance. Most old buildings have cast iron rainwater systems that should be maintained and preserved however; these inherent benefits make a cast iron rainwater system an ideal choice for both traditional and modern installations.
For specific technical sizes on our range of cast iron gutters, rainwater pipes or UK manufactured brackets for cast metal rainwater products.
| Pipe Size/Finish | Primer 65mm, Primer 75mm, Primer 100mm, Black Painted 65mm, Black Painted 75mm, Black Painted 100mm |
|---|
Cross-reference
| Primer 65mm | R2543 |
| Primer 75mm | R3043 |
| Primer 100mm | R4043 |
| Black Painted 65mm | XR2543 |
| Black Painted 75mm | XR3043 |
| Black Painted 100mm | XR4043 |
Yes. Cast iron airbricks are the appropriate material for listed buildings and conservation area properties where the original ventilation grilles were cast iron. They maintain the character and material authenticity required by most conservation officers and listed building consent conditions. We recommend confirming the specific pattern with your conservation officer before ordering.
Yes. All our mild steel brackets are supplied in either silver or black zinc plate. This coating protects the metal however, both will need painting prior to installation.
We have chosen to use zinc plating for two reasons; firstly that it is a more environmentally friendly than galvanising and secondly that it does not block up the threaded part of the rise and fall cups in the way that galvanising does.
The H528 measures 760mm wide x 370mm deep x 565mm high, making it well suited to the largest properties in the range — substantial country houses, civic buildings and ecclesiastical projects.
The satin chrome telescopic rooflight hand winder opener is available in multiple sizes. The telescopic mechanism adjusts to accommodate varying rooflight positions and throw requirements. For a full list of available sizes, visit tuscanfoundry.com or call 0333 987 4452.
Size selection depends on the distance between the mounting point and the rooflight frame, and the desired throw (opening distance). Our telescopic openers are available in 150mm, 250mm, and 300mm; the screw-jack stay is available in 300mm with a 250mm throw. For guidance on sizing for your specific rooflight, please call 0333 987 4452 or use the contact form.
LCC is traditional cast iron socket-and-spigot soil pipe made to BS 416-1:1990. Each length has a socket at one end and a spigot at the other, and joints are packed with caulking cord and finished with a jointing sealant. It is supplied with a black bitumen coating and is the like-for-like choice for external soil stacks on Victorian and Edwardian buildings. See the Traditional LCC range.
Yes. Cast iron is the original material for external soil stacks on most period buildings, and like-for-like replacement in cast iron is usually what conservation officers expect. Check with your local planning authority whether listed building consent is needed for the works.
At the foot of each stack above the shoe or gully, directly above offsets and bends, and below hopper heads where trees overhang the roof. On tall or long runs, an extra access point part-way up makes clearance easier.
Our cast iron airbricks are available in three standard sizes: 225mm × 75mm (single course), 225mm × 150mm (double course), and 225mm × 225mm (square format). These correspond to the standard airbrick positions used in Victorian and Edwardian brickwork. Each size is available across the School Board, Louvre, and Ornamental pattern ranges.
Yes, provided they are sized for the lower water temperature. Outputs are published at ΔT50; at ΔT30 a section gives about half that, so heat pump systems usually need more sections or a deeper pattern. We can prepare a radiator schedule at your heat pump design temperature.
