Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £120.86 through £267.10 ex VAT (£145.03 – £320.52 inc VAT)
A plain (non-eared) cast iron round access pipe with a bolted oval inspection door, for clearing blockages without dismantling the downpipe.
Sizes available: 65mm (2½″), 75mm (3″) and 100mm (4″)
Finishes: supplied primed as standard, or factory black painted. Linseed oil paint finishes are available on request.
References: R2510, R3010, R4010 (primed); XR2510, XR3010, XR4010 (black)
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The plain round access pipe is a short cast iron pipe section with a bolted oval inspection door, for clearing leaves and debris from a downpipe without taking the run apart.
The door is cast to the curve of the pipe and bolted closed; bed it on a suitable sealant on assembly to keep the joint watertight. As a plain fitting it has no cast ears, so it suits runs fixed with holdfasts, screw-to-wall brackets or ornamental earbands. An eared version is also available.
Fit access pipes at the foot of a stack above the shoe or gully, directly above offsets and bends, and below hoppers on buildings close to trees. On listed buildings, providing access in the right places avoids the temptation to break joints or cut pipe to clear a blockage.
Sizes: 65mm (2½″), 75mm (3″) and 100mm (4″) diameter.
Cast in solid grey iron in the UK to BS 460, and supplied primed for site painting or factory black painted. Linseed oil paint finishes can be quoted on request.
Suitable for listed buildings and conservation area work. For specification advice, a full schedule or a quotation, call 0333 987 4452 or use the contact form.
| Pipe Size/Finish | Primer 65mm, Primer 75mm, Primer 100mm, Black Painted 65mm, Black Painted 75mm, Black Painted 100mm |
|---|
Satin chrome has a brushed, low-sheen finish suited to contemporary interiors, while polished chrome has a bright mirror finish. Both are available in the telescopic hand winder range at Tuscan Foundry. The choice typically depends on the existing ironmongery specification.
Rooflight opener handles are available in polished brass, polished chrome, and satin chrome finishes. The polished brass version is the most popular choice for heritage and period interiors. For the full range, visit tuscanfoundry.com or call 0333 987 4452.
Prices are shown on the product page. For project quantities, specification support, or a formal quotation, call 0333 987 4452 or use the contact form.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
The School Board Airbrick (F020801AFC) is available in three standard sizes: 225mm × 75mm, 225mm × 150mm, and 225mm × 225mm. These correspond to one-, two-, and three-brick-course heights and allow ventilation requirements to be met across a range of subfloor and wall opening sizes.
Select your required size and finish options from the product page and add to cart for an instant price. For project quantities, bespoke requirements, or any specification queries, please call 0333 987 4452 or use the contact form at tuscanfoundry.com.
The H543 measures 504mm wide x 185mm deep x 200mm high, making it well suited to wide, shallow proportions that suit box-gutter outlets on period roofs, terraces and commercial premises.
Our cast iron airbricks are supplied in primed finish, ready for on-site painting. This allows them to be finished to match the existing ironwork or masonry colour of the building. Standard black gloss is the most common finish for conservation and heritage projects.
The H542A measures 240mm wide x 240mm deep x 290mm high, making it well suited to a compact square profile suited to smaller Georgian and Victorian properties, extensions and outbuildings.
For rooflights directly above a worktop or sink, a telescopic screw-jack hand winder is the most practical choice. Available in polished brass, satin chrome, and polished chrome, these openers allow controlled ventilation from a fixed handle position without requiring a pole. The 150mm or 250mm size is typically appropriate for standard-height kitchen rooflights.
