Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
£84.64 (£84.64 inc VAT)
Brass period rooflight handle opener for pole operated opening mechanisms.
Inc. Lumen Rooflights
Palletised UK delivery from £80. Please ensure suitable access and means of unloading on site. See delivery rates.
The Brass Rooflight Opener Handle – 1520mm is a handmade pole-operated rooflight handle finished in polished brass, designed for use with timber-framed rooflights and skylights that require operation from floor level or from a distance. At 1520mm in length, it is suited to rooflights positioned above head height — common in stairwells, hallways, and double-height spaces in period and traditional buildings.
The handle is constructed with a turned hardwood grip and a polished brass shaft, terminating in a 15mm-diameter hook for engagement with a rooflight stay or fitting. The handmade construction gives each piece a considered, craft quality that suits heritage interiors. It is commonly specified alongside Lumen Rooflight systems but is compatible with any rooflight fitted with an appropriate catch or stay.
Frequently ordered alongside a coat hook, the handle doubles as a decorative wall feature when not in use — a practical consideration in entrance halls and period interiors. Suited to Georgian terraces, Victorian townhouses, country houses, listed buildings, and any project where the opening mechanism should remain visually consistent with the building’s character.
For advice on compatibility or to discuss your project, call 0333 987 4452 or use the contact form on our website.
Need the rooflight itself? See conservation rooflights from Clement and The Rooflight Co.
Yes. Both the satin and polished chrome telescopic rooflight hand winder openers are compatible with Lumen Rooflights and most timber-framed skylights. Call 0333 987 4452 if you need to confirm compatibility with a specific model.
The H1 is available to accept round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. The 65mm and 75mm variants measure 305mm wide by 197mm deep and 210mm high. The 100mm variant measures 355mm wide by 230mm deep and 240mm high. A 150mm connection option is also available — please contact the team for dimensions.
The right size depends on the width of your gutter run and the volume of water you need to collect. The Strayton H42A is available in four widths: 305mm (12"), 355mm (14"), 457mm (18"), and 610mm (24"). As a general guide, wider hoppers suit larger roof areas and heavier rainfall zones. If you are unsure, our team can advise based on your gutter profile and catchment area — call 0333 987 4452.
The School Board Airbrick suits Victorian and Edwardian institutional, civic, and residential buildings where the square-grid airbrick pattern was standard — including school buildings, civic halls, estate housing, terrace houses, and warehouses. It is also appropriate on listed buildings and conservation area properties as a like-for-like replacement for worn square-grid cast iron vents.
The Iron Works Patterned Hit & Miss Vent suits Victorian and Edwardian buildings where decorative cast iron or brass ventilation grilles were part of the original specification — including terrace houses, civic buildings, churches, entrance halls, and estate properties. It is appropriate on listed buildings and conservation area properties as a like-for-like decorative vent replacement, and on new heritage-quality construction where period detailing is required.
Our hopper heads are available with a wide range of pipe connections to suit round, square, and rectangular downpipes. The Calnethorpe No.11 accepts round 65mm, 75mm, and 100mm; square 75×75mm, 100×100mm, and 125×125mm; and rectangular 100×75mm, 125×100mm, and 150×100mm. Connection options vary by model — please contact us to confirm availability for your chosen hopper.
Yes. Cast iron hopper heads are the historically appropriate choice for listed buildings, and are generally preferred by conservation officers and local planning authorities over modern plastic alternatives. Tuscan Foundry cast iron hopper heads are manufactured in solid grey iron and are suitable for use on listed buildings and within conservation areas. A linseed oil finish is also available, which is particularly appropriate for sensitive heritage projects.
The H541 measures 274mm wide x 130mm deep x 330mm high, making it well suited to a slender profile suited to narrow Georgian townhouses and terraces where space is limited.
The Brass Rooflight Opener Handle 1520mm is a pole-operated handle designed for manual rooflight opening mechanisms. It is suitable for use with Lumen Rooflights and compatible timber-framed skylights, and is particularly appropriate for period and heritage properties where a brass finish is specified.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
