Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £23.50 through £34.49 ex VAT (£28.20 – £41.39 inc VAT)
Fascia rise and fall bracket for beaded half round cast iron gutter.
Sizes available:
100mm (4″)
115mm (4.5″)
125mm (5″)
150mm (6″)
We also manufacture top rafter rise and fall brackets for deep half round guttering made by: Osma, Marley, Hunter and Lindab
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The RB502BH is a fascia-mounted rise and fall bracket for beaded half round cast iron guttering. Where a standard fixed fascia bracket cannot achieve precise fall control — on older Scottish properties with settled fascia boards, long gutter runs, or where the gradient must be set independently of the fascia angle — the RB502BH’s adjustable mechanism provides the correct solution. The bracket cup is designed for the beaded half round profile — the traditional rainwater system across Scotland and northern England.
Available in four sizes to suit all standard beaded half round gutter profiles: 100mm (4″), 115mm (4.5″), 125mm (5″), and 150mm (6″). The threaded rise and fall cup eliminates shimming and packing and allows accurate gradient control across the full run. Galvanised steel construction.
Widely specified on listed buildings, conservation area properties, and heritage restoration projects in Scotland and northern England. Particularly valuable on Edinburgh tenements, Glasgow stone terraces, and institutional buildings where long gutter runs on complex elevations require precise fall management.
Compatibility: Beaded half round cast iron gutter 100mm, 115mm, 125mm, 150mm. For project specification, call 0333 987 4452.
| Size | -F- 100mm, -G- 115mm, -K- 125mm, -N- 150mm |
|---|
Satin chrome has a brushed, low-sheen finish suited to contemporary interiors, while polished chrome has a bright mirror finish. Both are available in the telescopic hand winder range at Tuscan Foundry. The choice typically depends on the existing ironmongery specification.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
The Brass Rooflight Hand Winder Opener – Telescopic is available in 150mm, 250mm, and 300mm sizes. The telescopic mechanism provides flexibility to accommodate varying rooflight positions and throw requirements. Throw: 165mm.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Yes. Churches and ecclesiastical buildings are one of our most common project types. We regularly supply large sand cast gutters, rectangular and square downpipes, and bespoke hopper heads for church restorations. Many churches have non-standard profiles that require copy casting. We work directly with architects, church fabric advisors, and quinquennial inspection surveyors. Historic England and many Diocesan Advisory Committees specify cast iron as the appropriate material for listed ecclesiastical buildings.
Prices are shown on each product page. For project quantities, conservation specifications, or to discuss suitability for a listed building, call 0333 987 4452 or use the contact form.
Yes — we strongly recommend painting all products before installation to ensure full coverage on every surface, which reduces long-term maintenance. Standard Premier Rainwater products are supplied in a grey metal primer with rust inhibitors and need two undercoats and one top coat (or one undercoat and two top coats) of a good quality exterior paint.
Prices for rooflight openers are shown on the product pages at tuscanfoundry.com. For volume orders, project pricing, or compatibility queries, please call 0333 987 4452 or use the contact form on our website.
The H526 measures 440mm wide x 240mm deep x 460mm high, making it well suited to Victorian and Edwardian townhouses.
The Gothic foliate tracery design of the Ornamental Airbrick provides a good free-flow ventilation area relative to its face size. The open area is comparable to other standard cast iron airbrick patterns. The visual density of the pattern at a distance reads as solid ironwork, which suits formal and decorative elevations without compromising subfloor ventilation effectiveness.
