Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £34.46 through £44.33 ex VAT (£41.35 – £53.20 inc VAT)
Gutter bracket for the H16 moulded gutter
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The H16 gutter bracket provides a top-fix rafter support for the Regent No.16 moulded ogee gutter, mounting to the top surface of the rafter for open eaves construction or where no fascia board is present. The bracket cup is shaped specifically for the H16 moulded cross-section and provides a secure fixed support at the correct height.
Suited to open eaves and cut-roof construction on the large Victorian and Edwardian properties, country houses, and civic buildings where the H16 No.16 pattern is commonly found — building types where exposed rafter feet are often a feature of the original design. Fixed bracket with no height adjustment; for adjustable fall setting see the H16 rise and fall bracket.
Available in both H16 sizes: 125×100mm (5″×4″) and 150×100mm (6″×4″). Supplied in primed or factory black finish. For listed buildings and heritage projects where the H16 No.16 is the original profile. For specification support, call 0333 987 4452.
| Size/Finish | Black 125mm x 100mm, Black 150mm x 100mm, Galvanised 125mm x 100mm, Galvanised 150mm x 100mm |
|---|---|
| Position | Top, Side |
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Size selection depends on the distance between the mounting point and the rooflight frame, and the desired throw (opening distance). Our telescopic openers are available in 150mm, 250mm, and 300mm; the screw-jack stay is available in 300mm with a 250mm throw. For guidance on sizing for your specific rooflight, please call 0333 987 4452 or use the contact form.
Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for all listed building grades. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.
Cast iron radiators cost no more to run than modern steel or aluminium radiators. Cast iron is a very efficient material at emitting heat, thus you have items like le creuset cast iron pans. Cast iron holds it’s heat extremly well, which means that the radiators stay warm for longer.
Our bespoke rise and fall gutter brackets — including fascia, side rafter, and top rafter variants for Osma Roofline and Osma SuperLine systems — are manufactured to order. The standard lead time is 10–14 working days from receipt of a confirmed order. If you have a programme deadline, please call us on 0333 987 4452 and we will advise on current availability.
Tuscan Foundry's cast iron hopper heads are available in Standard Black and Heritage Colour finishes. A linseed oil paint finish is also offered — a sustainable, vapour-permeable option particularly appropriate for listed buildings and conservation projects. Heritage colour swatches are available from the team on request.
Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.
The right size depends on the width of your gutter run and the volume of water you need to collect. The Strayton H42A is available in four widths: 305mm (12"), 355mm (14"), 457mm (18"), and 610mm (24"). As a general guide, wider hoppers suit larger roof areas and heavier rainfall zones. If you are unsure, our team can advise based on your gutter profile and catchment area — call 0333 987 4452.
Rooflight opener handles can be ordered directly through tuscanfoundry.com. For volume orders or project-specific queries, please call 0333 987 4452 or use the contact form on our website.
The Cast Iron Louvre Airbrick suits Victorian, Edwardian, and inter-war residential and commercial properties where the louvre-pattern vent was the standard specification. It is the correct like-for-like replacement on listed buildings and conservation area properties, and suits new heritage-style construction requiring an authentic period ventilation grille.
