Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £9.94 through £16.29 +VAT
Our cast iron Og gutter stopend and cast iron ogee gutter stop ends
are suited to most period property renovations. Cast iron ogee gutter
is available in primed and black as standard.
Sizes Available:
100mm (4″)
115mm (4.5″)
125mm (5″)
Cast iron Og gutter stop end external (for spigot): OG4030, OG4530, OG5030, XOG4030, XOG4530, XOG5030
Cast iron Og gutter stop end internal (for socket): OG4031, OG4531, OG5031, XOG4031, XOG4531, XOG5031
A genuine cast iron rainwater system with the traditional ogee (OG) curved pattern.
The cast iron OG gutter stop end external right-hand closes the open right-hand end of a cast iron ogee gutter run where an external (outside-face) closing is required. The stop end completes the run neatly at a gable end, chimney return, or other point of termination, preventing water escape and protecting the fascia and wall below.
Manufactured in solid cast iron to BS 460:2002. Available in the three standard ogee sizes: 100mm (4″), 115mm (4.5″), and 125mm (5″). Supplied in primed or factory black finish. The right-hand external stop end is the mirror opposite of the left-hand internal stop end — check which configuration your run requires before ordering, as the two types are not interchangeable.
Specified on listed buildings and heritage restoration projects across England and Wales where the cast iron ogee is the historically correct profile. Accepted by conservation officers as the appropriate fitting for period rainwater work.
Compatibility: Cast iron ogee gutter 100mm, 115mm, 125mm. For specification support, call 0333 987 4452.
| Size/Finish | Primer 100mm, Primer 115mm, Primer 125mm, Black 100mm, Black 115mm, Black 125mm |
|---|
This opener is particularly well suited to period and heritage properties — Georgian and Victorian terraces, conservation area houses, traditional orangeries, and listed buildings where a brass finish is required to complement existing ironmongery. It is compatible with Lumen Rooflights and most timber-framed skylights.
Prices are shown on each product page for both sizes and all three finishes. For project quantities, specification support, or conservation enquiries, call us on 0333 987 4452 or use the contact form on our website.
The Regent H1 is well suited to Victorian and Edwardian terraces, listed commercial buildings, civic and institutional properties, and ecclesiastical buildings where a traditional funnel-form hopper is architecturally appropriate. Its multi-faceted tapering body reads as period-accurate on Gothic and classical building types alike, and it is a commonly specified choice for conservation and listed building projects across the UK.
The Antique Black cast iron version is suitable for external use. The Polished Lacquered version is best suited to interiors or sheltered external locations where the polished finish will be protected from weathering. The Polished Brass version is suited to interior and semi-exposed locations. For external applications on exposed elevations, the Antique Black finish is the recommended specification.
Yes. Cast iron is the material required by most conservation officers and listed building consents for the replacement or replication of traditional rainwater goods. Our hopper heads are produced in solid cast iron and we can assist with specification notes or material statements for planning purposes if required.
A hit and miss vent has a sliding plate on the reverse of the grille that can be moved to open or close the ventilation apertures. This allows airflow to be regulated without removing or replacing the grille. The vent can be fully open, partially open, or fully closed depending on ventilation requirements.
The Strayton H42A accepts round, square, and rectangular pipe connections. Round: 65mm, 75mm, and 100mm. Square: 75×75mm, 100×100mm, and 125×125mm. Rectangular: 100×75mm, 125×100mm, and 150×100mm. Please specify your required connection size when ordering.
Our brackets are more commonly used on cast iron rainwater systems. Unlike plastic, cast iron is heavy and the weight keeps the gutter in position. As such our brackets do not normally have retaining clips which could lead to plastic or lightweight gutters blowing out of the bracket. The profile of your gutter should match that of our bracket but without the weight to keep it in place you may well encounter problems in bad weather.
Satin chrome has a brushed, low-sheen finish suited to contemporary interiors, while polished chrome has a bright mirror finish. Both are available in the telescopic hand winder range at Tuscan Foundry. The choice typically depends on the existing ironmongery specification.
The H460 is well suited to Georgian, Regency, and Victorian buildings where a plain, undecorated rectangular hopper is the appropriate choice — particularly listed properties, conservation area buildings, and institutional or commercial buildings in historic town centres. Its clean, restrained form makes it equally appropriate on modern heritage-style construction where period accuracy is required without ornamental detail.
