Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £9.94 through £16.29 +VAT
Our cast iron Og gutter stopend and cast iron ogee gutter stop ends
are suited to most period property renovations. Cast iron ogee gutter
is available in primed and black as standard.
Sizes Available:
100mm (4″)
115mm (4.5″)
125mm (5″)
Cast iron Og gutter stop end external (for spigot): OG4030, OG4530, OG5030, XOG4030, XOG4530, XOG5030
Cast iron Og gutter stop end internal (for socket): OG4031, OG4531, OG5031, XOG4031, XOG4531, XOG5031
A genuine cast iron rainwater system with the traditional ogee (OG) curved pattern.
The cast iron OG gutter stop end external right-hand closes the open right-hand end of a cast iron ogee gutter run where an external (outside-face) closing is required. The stop end completes the run neatly at a gable end, chimney return, or other point of termination, preventing water escape and protecting the fascia and wall below.
Manufactured in solid cast iron to BS 460:2002. Available in the three standard ogee sizes: 100mm (4″), 115mm (4.5″), and 125mm (5″). Supplied in primed or factory black finish. The right-hand external stop end is the mirror opposite of the left-hand internal stop end — check which configuration your run requires before ordering, as the two types are not interchangeable.
Specified on listed buildings and heritage restoration projects across England and Wales where the cast iron ogee is the historically correct profile. Accepted by conservation officers as the appropriate fitting for period rainwater work.
Compatibility: Cast iron ogee gutter 100mm, 115mm, 125mm. For specification support, call 0333 987 4452.
| Size/Finish | Primer 100mm, Primer 115mm, Primer 125mm, Black 100mm, Black 115mm, Black 125mm |
|---|
The H528 measures 760mm wide x 370mm deep x 565mm high, making it well suited to the largest properties in the range — substantial country houses, civic buildings and ecclesiastical projects.
The H534 measures 430mm wide x 240mm deep x 366mm high, making it well suited to Victorian villas and townhouses.
Yes. Cast iron hopper heads are the historically appropriate choice for listed buildings, and are generally preferred by conservation officers and local planning authorities over modern plastic alternatives. Tuscan Foundry cast iron hopper heads are manufactured in solid grey iron and are suitable for use on listed buildings and within conservation areas. A linseed oil finish is also available, which is particularly appropriate for sensitive heritage projects.
A hit and miss vent has a sliding plate on the reverse of the grille that can be moved to open or close the ventilation apertures. This allows airflow to be regulated without removing or replacing the grille. The vent can be fully open, partially open, or fully closed depending on ventilation requirements.
We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.
The H532 measures 560mm wide x 290mm deep x 305mm high, making it well suited to a broad, low-profile design suited to substantial roofs and box gutters on period commercial and civic buildings.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
The H1 is available to accept round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. The 65mm and 75mm variants measure 305mm wide by 197mm deep and 210mm high. The 100mm variant measures 355mm wide by 230mm deep and 240mm high. A 150mm connection option is also available — please contact the team for dimensions.
Yes. Both the satin and polished chrome telescopic rooflight hand winder openers are compatible with Lumen Rooflights and most timber-framed skylights. Call 0333 987 4452 if you need to confirm compatibility with a specific model.
The Cast Iron Louvre Airbrick suits Victorian, Edwardian, and inter-war residential and commercial properties where the louvre-pattern vent was the standard specification. It is the correct like-for-like replacement on listed buildings and conservation area properties, and suits new heritage-style construction requiring an authentic period ventilation grille.
