Tuscan Foundry Products Logo Black
Find out more about our products by giving us a call
0333 987 4452
Linkedin Envelope
Tuscan Foundry Products Logo Black

Established 1893   |   BS 460:2002 Certified   |   UK & International Supply   |   Expert Technical Support   |   0333 987 4452

H39 - moulded cast iron gutter
CODE TFH39 Category

TFH39 – Large Moulded Cast Iron Gutter

Call for Price

H39 – Large moulded cast iron guttering.
This large moulded cast iron rainwater system is suitable for larger
buildings and industrial and railway heritage projects.
Sizes Available:

140 x 110mm
140 x 95mm

H39 – moulded cast iron gutter: H396401R, H396301R

The TFH39 is a large sand cast moulded cast iron gutter available in two sizes: 140×110mm and 140×95mm. Pattern references H396401R and H396301R. The TFH39 is a specialist conservation casting suited to buildings where this moulded profile is the original installed specification and a like-for-like replacement is required to satisfy listed building or conservation area requirements.

The two available sizes allow a close match to different instances of this profile in the historic building stock — one deeper (140×110mm) and one shallower (140×95mm). Where the original profile has been identified through site survey or profile sample, specify the size that corresponds to the measured cross-section of the surviving gutter.

Sand cast iron, manufactured to BS 460:2002. Supplied in grey primer or black painted finish. Lead times are typically 8–10 weeks. Contact Tuscan Foundry Products before ordering — a site survey or sample comparison is recommended on sensitive conservation projects.

Suitable for: Listed buildings requiring like-for-like conservation replacement, large Victorian and Edwardian properties, churches and civic buildings. Call for price: 0333 987 4452.

Additional information

FAQ Categories

All FAQ
What are large sand cast cast iron gutters?
Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.
Who are large sand cast gutters suitable for?
Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.
How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?
Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

Related products