Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £204.40 through £366.20 ex VAT (£245.28 – £439.44 inc VAT)
Cast iron square downpipe bend at 92.5, 112.5 or 135 degrees, in 75mm x 75mm and 100mm x 100mm, primer or black painted.
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The Square Pipe Bend changes the direction of a cast iron square downpipe run while keeping the full square section through the turn, so the pipework reads as one continuous architectural element on the elevation. Square bends have no front or side handing; the same fitting turns the run in any direction.
Three angles are available. The 92.5 degree bend takes a run horizontally, for example from an outlet across a wall face; the 112.5 degree bend gives a moderate change of direction; and the 135 degree bend gives a gentle set-back, typically used in pairs to step around a string course or eaves projection. Each bend has a moulded socket to receive the pipe above.
Bends are used wherever a square downpipe has to negotiate cornices, plinths, window heads and changes in the wall line, and to take water from a hopper or outlet to a convenient vertical run.
All fittings in our square range are cast iron to BS 460:2002, made to the same moulded profile so pipes and fittings line up neatly on the elevation. Every fitting is supplied either in primer, ready for painting on site, or in factory black. For listed buildings and conservation areas we also offer hand-applied linseed oil paint in heritage colours, which stays breathable and flexible and is straightforward to maintain. Stocked items are usually dispatched within 5 to 7 working days; allow around 6 to 7 weeks where a linseed oil finish is specified.
Square pipe sizes: 75mm x 75mm (3″ x 3″) and 100mm x 100mm (4″ x 4″).
Suitable for listed buildings, conservation areas and heritage restoration. For specification support or a project quotation, call 0333 987 4452.
| Size/Finish | Primer 75mm x 75mm, Primer 100mm x 100mm, Black Painted 75mm x 75mm, Black Painted 100mm x 100mm |
|---|---|
| Angle | 92.5 Deg, 112.5 Deg, 135 Deg |
Prices vary depending on size and finish. To get a quotation, please call 0333 987 4452 or use the contact form on the Tuscan Foundry website. The team can advise on the right specification for your project and provide a written quote.
Prices for our rooflight openers are shown on each product page. If you need multiple items, have a specific project in mind, or want to discuss compatibility, please call 0333 987 4452 or use the contact form at tuscanfoundry.com and we will be happy to assist.
The Cast Iron Louvre Airbrick (F020802AFC) is available in 225mm × 75mm, 225mm × 150mm, and 225mm × 225mm — standard brick course heights. All sizes share a consistent depth for straightforward like-for-like replacement of original cast iron louvre airbricks.
The Strayton H42A accepts round, square, and rectangular pipe connections. Round: 65mm, 75mm, and 100mm. Square: 75×75mm, 100×100mm, and 125×125mm. Rectangular: 100×75mm, 125×100mm, and 150×100mm. Please specify your required connection size when ordering.
Polished chrome has a bright mirror finish, while satin chrome has a brushed, low-sheen appearance. Both are available in the telescopic hand winder range. The finish choice typically depends on the ironmongery specification for the project.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Each radiator is priced by the number of sections, from 3 to 30, so you only pay for the length you need. Prices are shown on each product page, and delivery is a flat £95 plus VAT per radiator order. Please call 0333 987 4452 or use the contact form for a quotation.
Yes. Cast iron airbricks are frequently specified for listed buildings and conservation area properties precisely because they replicate the material and pattern of the original Victorian and Edwardian ventilation grilles. Local conservation officers and building control typically accept like-for-like cast iron replacements without objection. We can provide product specifications and material datasheets to support applications.
Yes. The Brass Rooflight Pole Winder Opener 300mm is compatible with Lumen Rooflights and most timber-framed skylights. If you have a specific rooflight model, call 0333 987 4452 to confirm compatibility before ordering.
A hit and miss vent has a sliding plate on the back of the grille that can be opened, partially restricted, or closed entirely without removing the vent from the wall. This allows airflow to be controlled from inside the building, making it suitable for underfloor void ventilation and through-wall ventilation where adjustable airflow is needed.
