Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £113.56 through £175.89 ex VAT (£136.27 – £211.07 inc VAT)
A 610mm (2ft) length of plain (non-eared) cast iron round rainwater pipe, fixed with holdfasts, pipe brackets or ornamental earbands.
Sizes available: 65mm (2½″), 75mm (3″) and 100mm (4″)
Finishes: supplied primed as standard, or factory black painted. Linseed oil paint finishes are available on request.
References: R2502, R3002, R4002 (primed); XR2502, XR3002, XR4002 (black)
Palletised UK delivery from £80. Please ensure suitable access and means of unloading on site. See delivery rates.
The 610mm plain round rainwater pipe is the shortest standard length in our non-eared cast iron downpipe range. It completes a run without site cutting and covers the short drops between fittings.
Plain pipe has a spigot and socket but no cast-on ears, so it is fixed independently of the pipe itself: with steel holdfasts driven into the mortar, screw-to-wall brackets, or ornamental earbands. The result is a cleaner line on the elevation, with fixings positioned to suit the masonry rather than dictated by the casting.
Plain pipe is typical of Regency and early Victorian buildings, of stucco and ashlar elevations where an unbroken line matters, and of walls where historic holdfasts survive. Combine it with the 914mm, 1219mm and 1829mm lengths to make up any height.
Sizes: 65mm (2½″), 75mm (3″) and 100mm (4″) diameter.
Cast in solid grey iron in the UK to BS 460, and supplied primed for site painting or factory black painted. Linseed oil paint finishes can be quoted on request.
Size in mm 65mm (2.5″) 75mm (3″) 100mm (4″)
A = Overall length 610 610 610
D = Insertion depth of socket 63 63 63
F = Internal diameter of socket 73 83 111
H = Outside pipe diameter 69 80 105
Suitable for listed buildings and conservation area work. For specification advice, a full schedule or a quotation, call 0333 987 4452 or use the contact form.
| Pipe Size/Finish | Primer 65mm, Primer 75mm, Primer 100mm, Black Painted 65mm, Black Painted 75mm, Black Painted 100mm |
|---|
A pole winder opener has a fixed-length arm, making it suited to standard rooflight positions with a consistent throw. A telescopic opener has an adjustable shaft, allowing it to accommodate varying rooflight positions and throw requirements. For guidance on which suits your project, call 0333 987 4452.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Where a standard profile can't match an existing design, we offer a bespoke casting service in association with our pattern makers, typically with a 12–14 week lead time. Please call 0333 987 4452 or use the contact form to discuss your project.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
The School Board Airbrick (F020801AFC) is available in three standard sizes: 225mm × 75mm, 225mm × 150mm, and 225mm × 225mm. These correspond to one-, two-, and three-brick-course heights and allow ventilation requirements to be met across a range of subfloor and wall opening sizes.
Tuscan Foundry's cast iron hopper heads are available in Standard Black and Heritage Colour finishes. A linseed oil paint finish is also offered — a sustainable, vapour-permeable option particularly appropriate for listed buildings and conservation projects. Heritage colour swatches are available from the team on request.
Yes. Polished brass ironmongery is historically appropriate for period buildings and is generally acceptable to conservation officers for listed building projects. If you require confirmation for your specific scheme, we are happy to advise — call 0333 987 4452.
Prices vary depending on size and finish. To get a quotation, please call 0333 987 4452 or use the contact form on the Tuscan Foundry website. The team can advise on the right specification for your project and provide a written quote.
Prices are shown on each product page. For project quantities, bespoke specifications, or conservation-related queries, please call us on 0333 987 4452 or use the contact form on our website.
