Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £199.30 through £321.00 ex VAT (£239.16 – £385.20 inc VAT)
A full 1829mm (6ft) length of eared cast iron round rainwater pipe with a socket at each end.
Sizes available: 65mm (2½″), 75mm (3″) and 100mm (4″)
Finishes: supplied primed as standard, or factory black painted. Linseed oil paint finishes are available on request.
References: R2501DE, R3001DE, R4001DE (primed); XR2501DE, XR3001DE, XR4001DE (black)
Palletised UK delivery from £80. Please ensure suitable access and means of unloading on site. See delivery rates.
This 1829mm (6ft) eared round rainwater pipe has a socket cast at each end. It is made for cutting: one casting yields two usable lengths, each with its own socket.
A standard length has a single socket, so cutting it leaves one piece with no means of jointing. The double socket length removes that problem and avoids the extra cost and joints of loose sockets. The pipe carries cast fixing ears for direct wall fixing on bobbins and pipe nails.
It is the practical choice on runs that do not divide neatly into standard lengths: tall stacks, runs broken by offsets and branches, and replacement work where new joints must align with existing fixing positions in historic masonry. Order it alongside standard lengths so that only the double socket pipe is ever cut.
Sizes: 65mm (2½″), 75mm (3″) and 100mm (4″) diameter.
Cast in solid grey iron in the UK to BS 460, and supplied primed for site painting or factory black painted. Linseed oil paint finishes can be quoted on request.
Size in mm 65mm (2.5″) 75mm (3″) 100mm (4″)
A = Overall length 1829 1829 1829
B = Overall width (including ears) 150 162 191
C = Distance between fixing centres 110 130 158
D = Insertion depth of socket 63 63 63
E = Back of fixing to pipe centre 47 53 65
F = Internal diameter of socket 73 83 111
G = Thickness of ear 15 15 15
H = Outside pipe diameter 69 80 105
Suitable for listed buildings and conservation area work. For specification advice, a full schedule or a quotation, call 0333 987 4452 or use the contact form.
| Pipe Size/Finish | Primer 65mm, Primer 75mm, Primer 100mm, Black Painted 65mm, Black Painted 75mm, Black Painted 100mm |
|---|
Where a standard profile can't match an existing design, we offer a bespoke casting service in association with our pattern makers, typically with a 12–14 week lead time. Please call 0333 987 4452 or use the contact form to discuss your project.
The handle is compatible with Lumen Rooflights and most pole-operated rooflight and skylight systems. If you are unsure whether it suits your specific rooflight, call us on 0333 987 4452 and we can advise.
The H1A is available with round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. Please specify your required connection size when ordering, as this determines the SKU. If you are unsure of the correct pipe size for your project, our team can advise — call 0333 987 4452.
The right size depends on the width of your gutter run and the volume of water you need to collect. The Strayton H42A is available in four widths: 305mm (12"), 355mm (14"), 457mm (18"), and 610mm (24"). As a general guide, wider hoppers suit larger roof areas and heavier rainfall zones. If you are unsure, our team can advise based on your gutter profile and catchment area — call 0333 987 4452.
The Iron Works Patterned Hit & Miss Vent suits Victorian and Edwardian buildings where decorative cast iron or brass ventilation grilles were part of the original specification — including terrace houses, civic buildings, churches, entrance halls, and estate properties. It is appropriate on listed buildings and conservation area properties as a like-for-like decorative vent replacement, and on new heritage-quality construction where period detailing is required.
All of our cast iron radiators are availbale as standard with a 1/2″ BSP (15mm) connection. We are though also able to supply many of our radiators and valves with 3/4″ BSP connections. Due to the size proportions of some radiators and valves 3/4″ connections may be more suitable.
Traditional Express can be painted, including in our linseed oil finish. LCC is supplied with a black bitumen coating, which cannot be reliably overpainted with conventional paints; maintain it with a compatible bituminous paint. Where a painted soil stack is required, specify Traditional Express.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
The Antique Black cast iron version is suitable for external use. The Polished Lacquered version is best suited to interiors or sheltered external locations where the polished finish will be protected from weathering. The Polished Brass version is suited to interior and semi-exposed locations. For external applications on exposed elevations, the Antique Black finish is the recommended specification.
LCC is traditional cast iron socket-and-spigot soil pipe made to BS 416-1:1990. Each length has a socket at one end and a spigot at the other, and joints are packed with caulking cord and finished with a jointing sealant. It is supplied with a black bitumen coating and is the like-for-like choice for external soil stacks on Victorian and Edwardian buildings. See the Traditional LCC range.
