Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £31.40 through £42.20 ex VAT (£37.68 – £50.64 inc VAT)
A screw-to-wall steel pipe bracket with a rubber gasket, for fixing plain (non-eared) cast iron round downpipes.
Sizes available: 65mm (2½″), 75mm (3″) and 100mm (4″)
Finishes: zinc galvanised, or factory black painted.
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The screw-to-wall bracket with gasket is a steel pipe bracket for fixing plain cast iron round downpipe, screwed to the wall and clamped around the pipe.
A rubber gasket lines the bracket, cushioning the casting and taking up small differences in diameter. Fit the bracket below the socket of each length so that the joint is supported, with additional brackets at offsets and on tall runs.
It is a practical alternative to holdfasts where mortar joints are too narrow, too soft or in the wrong place, and on elevations where fixings may need removing for maintenance or redecoration.
Sizes: 65mm (2½″), 75mm (3″) and 100mm (4″) diameter.
Made from steel and supplied zinc galvanised, or factory black painted to match black pipework.
Suitable for listed buildings and conservation area work. For specification advice, a full schedule or a quotation, call 0333 987 4452 or use the contact form.
| Pipe Size/Finish | Galvanised 100mm, Galvanised 65mm, Galvanised 75mm, Black Painted 65mm, Black Painted 75mm, Black Painted 100mm |
|---|
Cross-reference
| Galvanised 65mm | R2561G |
| Galvanised 75mm | R3061G |
| Galvanised 100mm | R4061G |
| Black Painted 65mm | XR2561G |
| Black Painted 75mm | XR3061G |
| Black Painted 100mm | XR4061G |
The H534 measures 430mm wide x 240mm deep x 366mm high, making it well suited to Victorian villas and townhouses.
The Iron Works Patterned Hit & Miss Vents are available in two sizes: 225mm × 82mm (single-course, suitable for standard airbrick positions) and 225mm × 150mm (double-course format). Both sizes are available in all three finishes: Antique Black, Polished Lacquered, and Polished Brass.
Our cast iron hopper heads are available in a choice of finishes including primer, painted, and specialist heritage finishes. Please call us on 0333 987 4452 or submit an enquiry to discuss the right finish for your project.
The Brass Rooflight Pole Winder Opener 300mm is a screw-jack operated rooflight opener designed for manual control of timber-framed skylights and Lumen Rooflights. The 300mm fixed arm is suited to standard rooflight positions and is finished in polished brass.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Yes. Polished brass ironmongery is historically appropriate for period buildings and is generally acceptable to conservation officers for listed building projects. If you require confirmation for your specific scheme, we are happy to advise — call 0333 987 4452.
Yes. The polished chrome telescopic rooflight hand winder opener is compatible with Lumen Rooflights and most timber-framed skylights. Call 0333 987 4452 to confirm compatibility with a specific rooflight model.
The H529 measures 430mm wide x 290mm deep x 540mm high, making it well suited to multi-storey Georgian and Victorian townhouses with a longer fall to the outlet.
Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.
The H528 measures 760mm wide x 370mm deep x 565mm high, making it well suited to the largest properties in the range — substantial country houses, civic buildings and ecclesiastical projects.
