Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £29.15 through £34.65 ex VAT (£34.98 – £41.58 inc VAT)
This gutter repair bracket is designed for the easy repair of cast iron guttering; with a threaded adjustable rise and fall cup, you can adjust the bracket to the height required. Galv/Zinc finish.
Cast iron gutter repair bracket is made in four sizes: 4″, 4.5″, 5″ and 6″ gutter profiles, and will also suit the profiles made by Alumasc, Hargreaves and Saint Gobain Classical rainwater systems.
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The REP/HR is a cast iron half round gutter repair bracket designed to provide a secure replacement fixing point where an existing bracket has failed, corroded, or been removed. Rather than replacing a complete gutter run to address a single failed fixing, the REP/HR allows the gutter to be re-supported quickly and accurately at the original position.
The bracket features a threaded adjustable rise and fall cup in a galv/zinc finish, allowing the gutter height to be set precisely to match the existing fall on the surrounding run. This is particularly valuable on older installations where the original bracket spacing or height is uneven, and on listed buildings where unnecessary disturbance to the gutter system should be minimised.
Available in four sizes to suit the full range of standard cast iron half round gutter profiles: 4″, 4.5″, 5″, and 6″. The REP/HR is also compatible with cast iron half round profiles manufactured by Alumasc, Hargreaves, and Saint Gobain Classical, making it a practical repair solution across a wide range of existing installations.
Particularly suited to maintenance contractors, conservation surveyors, and property managers responsible for the upkeep of period and listed buildings. A single bracket can restore a failing section of gutter to full function without the disruption or cost of a full resupport.
Compatibility: Cast iron half round gutter 4″, 4.5″, 5″, and 6″. Also suits Alumasc, Hargreaves, and Saint Gobain Classical half round profiles. For advice on repair specifications, call 0333 987 4452.
| Size | -F- 100mm, -G- 115mm, -K- 125mm, -N- 150mm |
|---|
The H527 measures 430mm wide x 195mm deep x 540mm high, making it well suited to Victorian villas and townhouses where a decorative leader head is wanted.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
The School Board Airbrick suits Victorian and Edwardian institutional, civic, and residential buildings where the square-grid airbrick pattern was standard — including school buildings, civic halls, estate housing, terrace houses, and warehouses. It is also appropriate on listed buildings and conservation area properties as a like-for-like replacement for worn square-grid cast iron vents.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Cast iron hopper heads from Tuscan Foundry are available in Standard Black (a factory-applied primer and topcoat finish) and Heritage Colours. A linseed oil paint finish is also available, providing a vapour-permeable, historically authentic coating that is particularly appropriate for listed buildings and conservation projects. Full finish specifications are available from the team.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for all listed building grades. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
