£42.68 – £52.52 +VAT
The Traditional Express cast iron soil product is an industry leading push fit soil system designed for a lifetime performance. The contemporary cast iron system provides the aesthetic appearance of traditional cast iron soil systems and is suitable for Listed properties and conservation projects.
The Traditional Express cast iron soil product is an industry leading push fit soil system designed for a lifetime performance. The contemporary cast iron system provides the aesthetic appearance of traditional cast iron soil systems and is suitable for Listed properties and conservation projects.
The push fit system provides substantial savings in labour for each joint and no specialist training is required for installation.
100mm diameter socketless pipes are available in 1.8m & 3m lengths and are supplied pre-painted in a black gloss finish. Compared to the traditional LCC soil system, our Traditional Express soil system is lighter and therefore slightly easier to handle and install. However, Traditional Express retains all the inherent qualities of cast iron including strength and longevity as well as the environmental benefits that cast iron offers over other modern materials.
Provided that your Traditional Express cast iron soil system is correctly installed and maintained you should receive a lifespan of more than 100 years. It is this long life that makes cast iron a long term, cost effective choice and it is 100% recyclable at the end of its life.
In addition to the other benefits offered by our Traditional Express soil system, it provides low noise levels due to the sound deadening properties of cast iron.
Applicable standards and codes of practice
BS 416 part 2 – Soil, waste and ventilating pipes and fitting
BS EN 681 – 1 Synthetic rubber gaskets
BS EN 12056 – Codes of practice for gravity drainage systems, internal buildings
Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.
Cast iron radiators cost no more to run than modern steel or aluminium radiators. Cast iron is a very efficient material at emitting heat, thus you have items like le creuset cast iron pans. Cast iron holds it’s heat extremly well, which means that the radiators stay warm for longer.
We are able to place dates and initials and insignia onto most of our flat faced rainwater hopper heads.
All of our cast iron radiators are availbale as standard with a 1/2″ BSP (15mm) connection. We are though also able to supply many of our radiators and valves with 3/4″ BSP connections. Due to the size proportions of some radiators and valves 3/4″ connections may be more suitable.
It is possible for us to supply towel warmers with an electric heating element in them. The Electrad system is a unique system available to us, that enables independent heating of towel rails and radiators via the properties electrical system.
Yes. All our mild steel brackets are supplied in either silver or black zinc plate. This coating protects the metal however, both will need painting prior to installation.
We have chosen to use zinc plating for two reasons; firstly that it is a more environmentally friendly than galvanising and secondly that it does not block up the threaded part of the rise and fall cups in the way that galvanising does.
We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.
Casting of iron is an imperfect processs. It is possible with some cast iron radiators that you will get minor imperfections in the surface finish. When radiators are painted this will reduce and over the years every additional coat of paint applied will provide a smoother more equal finish.
Our brackets are more commonly used on cast iron rainwater systems. Unlike plastic, cast iron is heavy and the weight keeps the gutter in position. As such our brackets do not normally have retaining clips which could lead to plastic or lightweight gutters blowing out of the bracket. The profile of your gutter should match that of our bracket but without the weight to keep it in place you may well encounter problems in bad weather.
We manufacture a wide variety of brackets for many different cast iron gutter and pipe profiles. More common types are the rise and fall, top fix and side fix rafter and the holderbat or pipe clip.
We can also offer traditional drive brackets, repair brackets and fascia brackets in both steel and cast iron.
It is always advisable to replace like with like because quite often the brackets form and important part of the buildings architecture. Occasionally buildings have special decorative brackets and our UK manufacturing allows us to produce small quantities of bespoke brackets when required.
Sales & Customer Services:
0333 987 4452
Tyn-Y-Clyn
Llanafarn Fawr
Builth Wells
Powys LD2 3LU
United Kingdom
Tuscan Foundry Products, Tyn-Y-Clyn, Llanafan Fawr, Builth Wells, Powys LD2 3LU, United Kingdom
© Tuscan Foundry Products 2022
A deep dive into the history, common issues, and maintenance of cast iron rainwater goods, with a focus on traditional Scottish architecture; cast iron rainwater goods have been a staple of Scottish architecture for centuries, prized for their durability, strength, and aesthetic appeal. These qualities are particularly important in Scotland, where the weather can be harsh and unforgiving. They are a testament to the craftsmanship and ingenuity of a bygone era, adding a touch of elegance and historical significance to buildings across the country.
Cast iron’s journey in Scottish architecture began in the 18th century. Its resilience and ability to withstand the challenging Scottish climate quickly gained popularity. The relatively low production cost of cast iron made it a popular choice for residential and commercial buildings, contributing to its widespread adoption.
The 19th century marked the pinnacle of cast iron rainwater goods in Scotland. This era saw the construction of magnificent Victorian buildings adorned with elaborate cast-iron rainwater systems, showcasing decorative hoppers, rhones (the Scottish term for gutters), and leader heads (downpipes). These features served a practical purpose, channelling rainwater away from the building and enhancing the architectural beauty of the structures.