Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
£28.50 ex VAT (£34.20 inc VAT)
Polypipe Deep Capacity, gutter 117mm fascia, rise fall gutter bracket. Our bespoke adjustable fascia rise and fall bracket for Polypipe 117mm Deep Capacity gutter is an adjustable gutter bracket with rise and fall, top rafter arm.
Bespoke made – 10 – 14 days.
Designed to suit the Polypipe Deep Flow Capacity guttering 117 mm system and is available with zinc/galvanised riser cups.
RD511 – Polypipe Deep Capacity gutter 117mm guttering bracket, adjustable rise and fall, fascia
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
| Colour | Black, White, Brown, Grey |
|---|
A hit and miss vent has a sliding plate on the back of the grille that can be opened, partially restricted, or closed entirely without removing the vent from the wall. This allows airflow to be controlled from inside the building, making it suitable for underfloor void ventilation and through-wall ventilation where adjustable airflow is needed.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
The H540 measures 600mm wide x 340mm deep x 475mm high, making it well suited to substantial country houses, civic and ecclesiastical buildings.
The School Board Airbrick is suited to Victorian and Edwardian terraced housing, mid-century school buildings, civic halls, public baths, and converted institutional buildings. Its plain square-grid face matches the utilitarian aesthetic of late-Victorian construction and is also appropriate for new heritage-style builds in conservation areas.
A hit and miss vent has a sliding plate on the reverse of the grille that can be moved to open or close the ventilation apertures. This allows airflow to be regulated without removing or replacing the grille. The vent can be fully open, partially open, or fully closed depending on ventilation requirements.
We are able to place dates and initials and insignia onto most of our flat faced rainwater hopper heads.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
The Polished Brass finish suits buildings where brass metalwork was standard — formal Victorian terrace housing, civic and institutional buildings, and high-quality estate architecture. It is appropriate on listed buildings and conservation properties where the wider ironmongery specification is in brass and a matching material is required.
