Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £25.21 through £25.71 ex VAT (£30.25 – £30.85 inc VAT)
Our drive-in rise and fall bracket for deep half-round cast iron gutter is suited to most period property renovations. These brackets are heavy steel brackets that are plated for a long life.
Sizes Available:
100 x 75mm
125 x 75mm
Plain deep half-round drive-in rise and fall gutter bracket: DH4343, DH5343
A genuine cast iron rainwater system with the traditional deep flow gutter.
British manufactured mild steel brackets for cast iron rainwater goods. Supplied in silver zinc plated finish as standard, ready for on-site painting.
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
British manufactured mild steel brackets for cast iron rainwater goods. Supplied in silver zinc plated finish as standard ready for on site painting.
Tuscan Foundry Products offer one of the UK’s widest ranges of brackets and can also manufacture bespoke products to match your existing brackets if required.
Our range includes top fix, side fix, rise and fall, fascia, repair and drive brackets as well as pipe clips for cast iron rain and soil pipe. Brackets are available in a range of profiles including Half Round, Ogee (OG), Deep Half Round, Notts Ogee, Moulded (G46), Beaded and Box gutter profiles.
Steel bracket for cast iron rainwater goods available to fit either the 4″, 4.5″ or 5″ half round profile.
This product consists of a rise and fall cup and a standard 12″ (305mm) drive spike. It can be used with a separate understay if required.
The cup is manufactured from 20mm x 3mm steel and has an 10mm threaded bar on the underside. The length of the threaded piece is approx 130mm. The drive bracket is manufactured from 20mm x 5mm steel and has a hole approx 15mm from the end to accept the threaded bar of the cup piece. If required the understay piece fixes below the drive spike. The understay is produced in 20mm x 3mm steel. There is a 6mm hole in the flat end of the understay to allow fixing to the wall and an 10mm hole at the other end to accept the threaded bar of the cup.
Brackets are supplied zinc plated in silver for on site painting by others.
| Size/Finish | Zinc 100mm x 75mm, Zinc 125mm x 75mm |
|---|---|
| Understay | No – Understay, Understay |
The H532 measures 560mm wide x 290mm deep x 305mm high, making it well suited to a broad, low-profile design suited to substantial roofs and box gutters on period commercial and civic buildings.
The satin chrome telescopic rooflight hand winder is well suited to contemporary and transitional interiors where a brushed chrome finish complements modern or minimal ironmongery. It is compatible with Lumen Rooflights and timber-framed skylights.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Prices are shown on the product page. For project quantities, specification support, or a formal quotation, call 0333 987 4452 or use the contact form.
The handle is compatible with Lumen Rooflights and most pole-operated rooflight and skylight systems. If you are unsure whether it suits your specific rooflight, call us on 0333 987 4452 and we can advise.
Prices are shown on each product page. For project quantities, bespoke specifications, or conservation-related queries, please call us on 0333 987 4452 or use the contact form on our website.
Half round gutter has a simple semicircular profile and is the most widely used pattern across all building types and periods. Ogee (OG) gutter has an S-shaped decorative profile, historically associated with Victorian and Edwardian properties. Moulded ogee profiles, such as the G46 and Regent No.16, have a more elaborate cross-section with additional mouldings and are typically found on larger or more architecturally significant buildings. The correct choice depends on what is already present on the building and any requirements set by a conservation officer.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Yes. Cast iron is the material required by most conservation officers and listed building consents for the replacement or replication of traditional rainwater goods. Our hopper heads are produced in solid cast iron and we can assist with specification notes or material statements for planning purposes if required.
