Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
£26.50 +VAT
Osma SuperLine adjustable fascia rise and fall gutter bracket. Our bespoke fascia rise and fall
gutter bracket is designed to suit the Osma SuperLine system, and is available with
black riser cups.
Osma Superline guttering bracket, adjustable rise and fall, fascia
Osma Surperline 5t594 bow and pin rise and fall gutter bracket
Bespoke made – 10 – 14 days.
The OSL-FRF is a bespoke fascia-mounted rise and fall gutter bracket, manufactured to suit the Osma SuperLine half-round PVC guttering system. Where precise fall control is needed along the gutter run — particularly on long runs, older or uneven fascias, or where the fall cannot be derived from the fascia line itself — the adjustable riser bracket allows the gutter to be set at the correct gradient independently of the fixing surface.
The bracket features a galvanised steel fascia plate and a threaded steel riser column topped with a bow-and-pin gutter cup in black. The riser height is adjustable, allowing fall to be set accurately at each bracket position without shimming or packing the fascia. Compatible with the Osma SuperLine system and the Osma Surperline 5t594 bow and pin bracket arrangement.
Suited to new-build and refurbishment projects using the Osma SuperLine guttering system, and to situations where fall correction is required on an existing installation. Used on both residential and light commercial buildings.
Manufactured to order with black riser cups. Lead time 10–14 working days from order confirmation.
System compatibility: Osma SuperLine half-round guttering system. Compatible with Osma Surperline 5t594 bow and pin bracket arrangement. For specification queries, call 0333 987 4452.
| Colour | White, Brown, Grey, Black |
|---|
Prices are shown on each product page. For project quantities, conservation specifications, or to discuss suitability for a listed building, call 0333 987 4452 or use the contact form.
The Paxton H82 is a large-format hopper with decorative collar mouldings, making it particularly well suited to late Victorian and Edwardian buildings where the rainwater system forms part of the architectural composition. Typical applications include commercial heritage buildings, civic buildings, large detached houses, institutional premises, and warehouse conversions where a more substantial fitting is appropriate.
The Polished Lacquered finish suits buildings where period ironwork was finished bright rather than painted — formal entrance elevations, listed properties, and settings where the grille contributes to the decorative programme of the facade. It is appropriate for conservation specifications and high-specification heritage new build.
Casting of iron is an imperfect processs. It is possible with some cast iron radiators that you will get minor imperfections in the surface finish. When radiators are painted this will reduce and over the years every additional coat of paint applied will provide a smoother more equal finish.
Yes. Cast iron hopper heads are the historically appropriate choice for listed buildings, and are generally preferred by conservation officers and local planning authorities over modern plastic alternatives. Tuscan Foundry cast iron hopper heads are manufactured in solid grey iron and are suitable for use on listed buildings and within conservation areas. A linseed oil finish is also available, which is particularly appropriate for sensitive heritage projects.
The Ornamental Airbrick is most appropriate on Victorian Gothic buildings — churches, chapels, vicarages, almshouses, collegiate buildings, and high-specification estate architecture — where decorative ironwork was part of the original design. It suits listed building replacements in kind and heritage new build where period accuracy in detailing is expected.
Yes. Polished brass is a historically appropriate finish for period and listed buildings and is generally acceptable to conservation officers. If your project requires specific confirmation, we are happy to advise — call 0333 987 4452.
Our hopper heads are available with a wide range of pipe connections to suit round, square, and rectangular downpipes. The Calnethorpe No.11 accepts round 65mm, 75mm, and 100mm; square 75×75mm, 100×100mm, and 125×125mm; and rectangular 100×75mm, 125×100mm, and 150×100mm. Connection options vary by model — please contact us to confirm availability for your chosen hopper.
The H1A is available with round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. Please specify your required connection size when ordering, as this determines the SKU. If you are unsure of the correct pipe size for your project, our team can advise — call 0333 987 4452.
Size selection depends on the distance between the mounting point and the rooflight frame, and the desired throw (opening distance). Our telescopic openers are available in 150mm, 250mm, and 300mm; the screw-jack stay is available in 300mm with a 250mm throw. For guidance on sizing for your specific rooflight, please call 0333 987 4452 or use the contact form.
