Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
£152.33 +VAT
A genuine cast iron rainwater pattern was initially used in and around Nottingham, hence Notts Ogee. The profile is only available in one size (4.5″) and has a flat base, unlike the more traditional ogee (OG) curved pattern.
Cast iron Notts Og guttering: G850
The Notts OG is a cast iron gutter profile with a specific regional identity. Originally developed for and used predominantly in Nottingham and the surrounding East Midlands, it takes its name from its place of origin. The profile shares the ogee family’s characteristic decorative front face but has a more angular, squared-off cross-section compared to the common OG, with a flat base rather than the curved bottom of the standard ogee. This gives the Notts OG both its distinctive silhouette and a greater depth of section relative to its width, increasing flow capacity while maintaining the visual character of a traditional Victorian ogee gutter.
The Notts OG is available in a single size only: 4.5″ (115mm). It is an asymmetric profile — the socket sits consistently on one side of each section and fitting — which means all angles, stop ends, and outlets are handed and cannot be reversed or flipped. Each section has pre-drilled holes in the back face, allowing direct fixing through the gutter back to the fascia without a separate bracket where the construction permits.
This section is 1829mm (6 feet) in length, manufactured in solid cast iron to BS 460:2002. Supplied in primed or factory black finish. Tuscan Foundry Products has been casting this profile since 1893, and it remains the correct heritage-accurate replacement for Nottinghamshire and Midlands properties where the Notts OG is the original installed profile.
Found on Victorian terraced housing, lace-era factory buildings, civic architecture, churches, and period commercial properties throughout Nottingham, Derby, Leicester, and the wider East Midlands. Listed buildings in these areas are typically required to replace like-for-like, making the Notts OG the only appropriate specification where it is the original profile.
Part code: G850. For specification support or a project quotation, call 0333 987 4452.
The H530 measures 330mm wide x 150mm deep x 350mm high, making it well suited to Georgian and Victorian terraces, where a compact, narrow footprint is needed.
The School Board Airbrick is suited to Victorian and Edwardian terraced housing, mid-century school buildings, civic halls, public baths, and converted institutional buildings. Its plain square-grid face matches the utilitarian aesthetic of late-Victorian construction and is also appropriate for new heritage-style builds in conservation areas.
Size selection depends on the distance between the mounting point and the rooflight frame, and the desired throw (opening distance). Our telescopic openers are available in 150mm, 250mm, and 300mm; the screw-jack stay is available in 300mm with a 250mm throw. For guidance on sizing for your specific rooflight, please call 0333 987 4452 or use the contact form.
Prices are shown on each product page. For project quantities, specification advice, or a formal quotation, please call 0333 987 4452 or use the contact form.
Prices are shown on the product page. For project quantities, specification support, or a formal quotation, call 0333 987 4452 or use the contact form.
The Calnethorpe is designed for formal classical and Georgian elevations where scale and material authenticity matter — large townhouses, country houses, manor houses, and institutional buildings. It is also widely specified for new-build heritage projects where cast iron rainwater goods are required to conservation standard.
A corner hopper head collects rainwater from two gutters running at right angles and channels it into a single downpipe. They are typically required at internal roof valleys, on hipped roofs, and wherever two runs of gutter converge at a corner. The Regent H1A is designed specifically for this application and is sized to suit the most common gutter profiles.
It is possible for us to supply towel warmers with an electric heating element in them. The Electrad system is a unique system available to us, that enables independent heating of towel rails and radiators via the properties electrical system.
Victorian properties most commonly used Ogee (OG) gutter profiles, including the standard Cast Iron Ogee and the G46 Moulded Ogee. Half Round guttering was also widely used, particularly in the later Victorian period. The correct profile depends on what is already present on the building — we recommend inspecting any surviving sections and matching the profile, size, and socket direction exactly. We supply 19 standard gutter profiles and can copy-cast any non-standard profile from a drawing, photograph, or physical sample.
Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.
