Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
£152.33 +VAT
A genuine cast iron rainwater pattern was initially used in and around Nottingham, hence Notts Ogee. The profile is only available in one size (4.5″) and has a flat base, unlike the more traditional ogee (OG) curved pattern.
Cast iron Notts Og guttering: G850
The Notts OG is a cast iron gutter profile with a specific regional identity. Originally developed for and used predominantly in Nottingham and the surrounding East Midlands, it takes its name from its place of origin. The profile shares the ogee family’s characteristic decorative front face but has a more angular, squared-off cross-section compared to the common OG, with a flat base rather than the curved bottom of the standard ogee. This gives the Notts OG both its distinctive silhouette and a greater depth of section relative to its width, increasing flow capacity while maintaining the visual character of a traditional Victorian ogee gutter.
The Notts OG is available in a single size only: 4.5″ (115mm). It is an asymmetric profile — the socket sits consistently on one side of each section and fitting — which means all angles, stop ends, and outlets are handed and cannot be reversed or flipped. Each section has pre-drilled holes in the back face, allowing direct fixing through the gutter back to the fascia without a separate bracket where the construction permits.
This section is 1829mm (6 feet) in length, manufactured in solid cast iron to BS 460:2002. Supplied in primed or factory black finish. Tuscan Foundry Products has been casting this profile since 1893, and it remains the correct heritage-accurate replacement for Nottinghamshire and Midlands properties where the Notts OG is the original installed profile.
Found on Victorian terraced housing, lace-era factory buildings, civic architecture, churches, and period commercial properties throughout Nottingham, Derby, Leicester, and the wider East Midlands. Listed buildings in these areas are typically required to replace like-for-like, making the Notts OG the only appropriate specification where it is the original profile.
Part code: G850. For specification support or a project quotation, call 0333 987 4452.
Our cast iron airbricks are available in a choice of finishes including primer and painted options. If you require a specific finish for a conservation project or to match existing ironwork, please call us on 0333 987 4452 to discuss.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
The Brass Rooflight Opener Handle 1520mm is a pole-operated handle designed for manual rooflight opening mechanisms. It is suitable for use with Lumen Rooflights and compatible timber-framed skylights, and is particularly appropriate for period and heritage properties where a brass finish is specified.
The H525 measures 270mm wide x 208mm deep x 285mm high, making it well suited to smaller period properties, extensions and outbuildings.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
The Cast Iron Louvre Airbrick suits Victorian and Edwardian terraced housing, semi-detached properties, public houses, agricultural buildings, and workshop structures where the original airbrick was a louvre-face grille. The horizontal fin profile is widely found in British domestic and light industrial construction from the 1870s through to the 1950s.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
The Ornamental Airbrick is most appropriate on Victorian Gothic buildings — churches, chapels, vicarages, almshouses, collegiate buildings, and high-specification estate architecture — where decorative ironwork was part of the original design. It suits listed building replacements in kind and heritage new build where period accuracy in detailing is expected.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Yes. Cast iron airbricks are the appropriate material for listed buildings and conservation area properties where the original ventilation grilles were cast iron. They maintain the character and material authenticity required by most conservation officers and listed building consent conditions. We recommend confirming the specific pattern with your conservation officer before ordering.
