Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £13.40 through £19.70 ex VAT (£16.08 – £23.64 inc VAT)
A genuine cast iron rainwater pattern the G46 or No.46 is available in two profile sizes. The profile is a larger version of the more traditional ogee (OG) curved pattern and offers increased capacity.
UK delivery from £30. Fittings are despatched boxed. See delivery rates.
The cast iron G46 moulded gutter fascia bracket is the standard fixed support for the G46 pattern, mounting to the front face of the fascia board to carry the gutter at the correct line and level. The bracket cup is shaped specifically for the G46 moulded section — the larger Victorian and Edwardian ogee profile — ensuring a secure and correctly seated fit without modification.
Available in both G46 profile sizes: 125mm (5″) and 150mm (6″). Cast iron construction with factory black finish. Fixed bracket with no height adjustment — for adjustable fall control on long runs or uneven fascias, see the drive-in rise and fall bracket. The G46 fascia bracket is not interchangeable with common ogee brackets.
Specified on listed buildings and heritage restoration projects where the G46 moulded pattern is the historically correct profile. Accepted by conservation officers as the appropriate fixing for period rainwater work on Victorian, Edwardian, and later period buildings.
Compatibility: G46 moulded cast iron gutter 125mm and 150mm only. For specification support, call 0333 987 4452.
| Size/Finish | Primer 100mm x 75mm, Primer 125mm x 100mm, Black 100mm x 75mm, Black 125mm x 100mm |
|---|
The Brass Rooflight Hand Winder Opener – Telescopic is available in 150mm, 250mm, and 300mm sizes. The telescopic mechanism provides flexibility to accommodate varying rooflight positions and throw requirements. Throw: 165mm.
The Iron Works Patterned Hit & Miss Vent suits Victorian and Edwardian buildings where decorative cast iron or brass ventilation grilles were part of the original specification — including terrace houses, civic buildings, churches, entrance halls, and estate properties. It is appropriate on listed buildings and conservation area properties as a like-for-like decorative vent replacement, and on new heritage-quality construction where period detailing is required.
Select your required size and finish options from the product page and add to cart for an instant price. For project quantities, bespoke requirements, or any specification queries, please call 0333 987 4452 or use the contact form at tuscanfoundry.com.
The Ornamental Airbrick is suited to Victorian villas, bay-fronted terraces, Gothic Revival institutional buildings, church halls, and civic buildings where decorative ironwork is part of the architectural language. It is also appropriate for listed buildings and conservation area properties where the airbrick is on a prominent elevation and the ventilation grille is expected to carry decorative character.
The polished chrome telescopic rooflight hand winder opener is available in multiple sizes. The telescopic mechanism adjusts to accommodate varying rooflight positions and throw requirements. For a full list of available sizes, visit tuscanfoundry.com or call 0333 987 4452.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
Satin chrome has a brushed, low-sheen finish suited to contemporary interiors, while polished chrome has a bright mirror finish. Both are available in the telescopic hand winder range at Tuscan Foundry. The choice typically depends on the existing ironmongery specification.
The H529 measures 430mm wide x 290mm deep x 540mm high, making it well suited to multi-storey Georgian and Victorian townhouses with a longer fall to the outlet.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
